catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Resistance heater, Coil heater, Heating element, Controller, Cartridge heater
Text version of the page
always one stepahead
coil heater Maxi/4.6 x 8.6 with clamping band
● Sheath temperature of heating element: max. 750 C
● Voltage: max. 440 V, Standard: 230 V
● Power tolerance (cold): 10%
● High voltage strength (cold): 1250 V-AC ≥ 5 M Ω at 500 V-DC
● Insulation resistance (cold):
● Leakage current (cold): ≤ 0.5 mA at 253 V-AC
● Surface load: max. 10 W/cm
2 ● high power with low installation measures
● Connection: 1000 mm PTFE insulated nickel leads, several wires with ground wire and braided metal sleeving (Standard, others on request)
● optimal price-performance ratio
● even temperature distribution
● integrated hotcontrol
thermocouple (ungrounded standard) Fe-CuNi (type J, Standard)/NiCr-Ni (type K) (IEC 60584)
● Measuring point can be chosen
● Connection version can be chosenOther dimensions and product varieties on request.We reserve the right to change technical details.Please note the installation and storage instructions.
Measures [mm] L:Total lengthI:Inner diametertolerances: up to I 30 mm -0.10/-0.30 up to I 50 mm -0.20/-0.40
29
the plastic-processing industry
hotspring (type WRP) - 15247 hotcone
(type DBM) Nozzle heating Maxi
Technical data
● hotspringcoil heater Maxi/4.6 x 8.6 with clamping band
● Sheath temperature of heating element: max. 750 C
● Voltage: max. 440 V, Standard: 230 V
● Power tolerance (cold): 10%
● High voltage strength (cold): 1250 V-AC ≥ 5 M Ω at 500 V-DC
● Insulation resistance (cold):
● Leakage current (cold): ≤ 0.5 mA at 253 V-AC
● Surface load: max. 10 W/cm
2 ● high power with low installation measures
● Connection: 1000 mm PTFE insulated nickel leads, several wires with ground wire and braided metal sleeving (Standard, others on request)
● optimal price-performance ratio
● even temperature distribution
● integrated hotcontrol
thermocouple (ungrounded standard) Fe-CuNi (type J, Standard)/NiCr-Ni (type K) (IEC 60584)
● Measuring point can be chosen
● Connection version can be chosenOther dimensions and product varieties on request.We reserve the right to change technical details.Please note the installation and storage instructions.
Measures [mm] L:Total lengthI:Inner diametertolerances: up to I 30 mm -0.10/-0.30 up to I 50 mm -0.20/-0.40
29