catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Coil heater, Digital controller, Nozzle, Controller, Tubular heater
Text version of the page
| ® | |||||||||||||||||||||||||||||
| always one step ahead | |||||||||||||||||||||||||||||
| Technical data Particularly suitable for heating of small components. • Profile 0: 4.0 mm • Maximum total length: 350 mm • Sheath material: stainless steel • Cartridge heater sheath temperature: max. 275 °C • Heating conductor material: NiCr 8020 • High voltage proof (cold in extended condition) with nominal voltage < 24 V: 500 V-AC with nominal voltage > 24 V: 800 V-AC • Insulation resistance (cold): > 5 MQ at 500 V-DC • Maximum leakage current (cold): < 0.5 mA at 253 V-AC • Length tolerance: ± 2.5 %, min. ± 1.5 mm • Power tolerance (cold): ±10 % • Diameter tolerance: -0.02/-0.06 mm • Maximum supply voltage: 250 V at max. 1.6 A • Maximum sheath surface load: 20 W/cm2 • Length of unheated zone connection area: 13 mm • Length of unheated zone bottom area: 6 mm • Connection options: PTFE insulated Ni leads (multicore) PTFE disc | |||||||||||||||||||||||||||||
| hotrod® (type HHP) 0 4.0 mm | |||||||||||||||||||||||||||||
| oo O | |||||||||||||||||||||||||||||
| P | |||||||||||||||||||||||||||||
| Measures [mm] P = PTFE disc | |||||||||||||||||||||||||||||
| Installation instructions for higher tool temperatures | |||||||||||||||||||||||||||||
| PTFE disc outside tool | PTFE disc inside tool with ring gap | ||||||||||||||||||||||||||||
| 1 = tool 2 = cartridge heater 3 = PTFE disc 4 = ring gap | |||||||||||||||||||||||||||||
| Options (upon request) • With application-specific power distribution With Fe-CuNi (type J/standard, optional type L), or NiCr-Ni (type K) thermocouple, potential-free, measurement points: at the bottom or central Other dimensions and product variants upon request. We reserve the right to change technical details. Please note the installation and storage instructions. | |||||||||||||||||||||||||||||
| hotrod* (type HHP) 4.0 mm Application:.......................... + Article No. (if known):....... + 0:...................................... + Length:............................. + Wattage:........................... + Voltage:............................ + Connection length:........... + Connection option:........... + Thermocouple:................. + Measurement point:......... + Quantity:........................... | |||||||||||||||||||||||||||||
| 8 | |||||||||||||||||||||||||||||