hotrod (type HHP and LHT) - HOTSET - #7

always one step ahead

In those areas where precise temperature control is essential, hotset offers hotrod® cartridge heaters with inbuilt thermocouple. Together with a control unit from the hotcontrol® C series, you can ensure precise temperatures.

• Profile 0 [mm] (for stock hotrod®): 6.5; 8.0; 10.0; 12.5

• Profile 0 ["]: 1/4; 3/8; 1/2; 5/8

• Maximum total length:

0 > 6.0 mm (grinded) 1500 mm 0 > 6.0 mm (ungrinded) 3000 mm

• Sheath material: stainless steel

• Cartridge heater sheath temperature: max. 750 °C

• Heating conductor material: NiCr 8020

• High voltage proof

(cold in extended condition)

with nominal voltage < 24 V: 500 V-AC

with nominal voltage > 24 V: 1500 V-AC

• Insulation resistance (cold): > 5MQ at 500 V-DC

^• Maximum leakage current (cold): < 0.5 mA at 253 V-AC

• Length tolerance: ±1.5 %, min. ± 1 mm

• Power tolerance (cold): ±10 %

^• Diameter tolerance: metric -0.02/-0.06 mm inch ± 0.02 mm/± 0.08 mils

• Maximum supply voltage: 480 V

for stock hotrod^® 230 V (Standard)

^• Connection options: see page 14

• Thermocouple: Fe-CuNi (type J/standard), Fe-CuNi (type L) up to 300 °C operating tempe­rature or NiCr-Ni (type K) up to 750 °C operating temperature, potential-free,

measurement points: at the bottom or central

Other dimensions and product variants upon request.

We reserve the right to change technical details.

Stock dimensions for hotrod® with thermocouples can be found in the stock range brochure.

Please note the installation and storage instructions.

Application:...................

+ Article No. (if known):

+ 0:...............................

+ Length:......................

+ Wattage:....................

+ Voltage:.....................

+ Connection length: .... + Connection option: ....

+ Thermocouple:..........

+ Measurement point: + Quantity:....................

7