catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Nozzle, Sprue nozzle, Coil heater, Controller, Cartridge heater
Text version of the page
| ® | |||||||||||||||||||
| always one step ahead | |||||||||||||||||||
| Technical data Spiral cartridges Compressed or non-compressed spiral cartridge heaters can be used everywhere where a surface load of 10 W/cm2 is sufficient, based on the technical specifications. In these cases, the simple construction of the spiral cartridge heaters enables cost-effective heating and long durability. In the low voltage sector, the current can be fed back via the cartridge heater sheath on spiral heating cartridges so that just one connection is required. The spiral cartridge heater connections can also be attached at both ends. Typical application areas for spiral cartridge heaters are the heating of sealing tools in the packaging industry, cutting of plastic foils or textiles especially with the integral cutting blade, heating of medical equipment or analytical equipment. | |||||||||||||||||||
| hotrod® (type LHT) | |||||||||||||||||||
| • Profile 0 [mm]: 6.5; 8.0; 10.0; 12.5; 16.0; 20.0 with connection at both ends or return via the cartridge heater sheath • Stock 0 [mm]: 10.0; 12.5; 16.0; 20.0 • Maximum total length: 3000 mm • Sheath material: stainless steel • Cartridge heater sheath temperature: max. 750 °C • Maximum sheath surface load: 10 W/cm2 • Heating conductor material: NiCr 8020 • High voltage proof (cold in extended condition) with nominal voltage < 24 V: 500 V-AC with nominal voltage > 24 V: 1500 V-AC (not for return via the cartridge heater sheath) • Insulation resistance (cold): > 5 MQ at 500 V-DC • Maximum leakage current (cold): < 0.5 mA at 253 V-AC • Length tolerance: ±1.5 % • Power tolerance (cold): ±10 % • Diameter tolerance: ± 0.1 mm • Maximum supply voltage: 480 V • Connection: 250 mm glas silk insulated Ni-leads from inside Other dimensions and product variants upon request. We reserve the right to change technical details. Please note the installation and storage instructions. | |||||||||||||||||||
| si | |||||||||||||||||||
| hotrod* (type LHT) Application:................... + Article No. (if known): + 0:............................... + Length:...................... + Wattage:.................... + Voltage:..................... + Connection length: .... + Connection option: .... + Quantity:.................... | |||||||||||||||||||
| "D "D 3_ | |||||||||||||||||||
| 11 | |||||||||||||||||||