http://U324_ZS25UFA_DoP_e_100414 www.hoentzsch.com 5/6
Vane wheel flow
sensor ZS25 with
optional integrated transducer UFA
Accessories
Description Article no.
calibration certificate v/FA klbneu
standard calibration value
depending on vane wheel
type, others see Data Sheet
U183
mn 20 E: 1; 2; 5; 10; 15; 20 m/s
mn 40 E: 1; 2; 5; 10; 20; 30 m/s
mn 80 E: 1; 2; 5; 10; 20; 30 m/s
mn120 E: 1; 2; 5; 10; 20; 30 m/s
probe guide piece
SFB 25 E-54 / G 1 1/4" ZG5
with bushing
as in drawing 5
for any repeated positioning with marginal
excess pressure (max. 1.5 bar/ 150 kPa) /
low pressure, through hole 25 mm,
connection by screw thread sleeve or ball
valve with inside thread G 1 1/4",
working temp. range -20 ... +240 °C,
intallation length 54 mm,
materials: stainless steel, VITON®, PTFE
bushing
b004/510
probe guide piece
SFK 25 E-100 / G 2" ZG2
with clamping yoke
as in drawing 2
for any repeated positioning even with
higher excess pressure
(max. 10 bar/1 MPa) / low pressure,
through hole 25 mm,
connection by screw thread sleeve or ball
valve inside thread G 2",
working temp. range -20 ... +240 °C,
installation lenght 100 mm,
materials: stainless steel, VITON® lip-seal,
incl. hook spanner and hexagon screw
driver
b004/210
probe guide piece
SFB 25 E-70 / F-DN50 PN16
ZG1 for max. +550 °C
as in drawing 1
For any repeated positioning with lower
pressures above atmospheric (max. 2 bar /
200 kPa) / subatmospheric pressures,
working temperature range -40 ... +550°C,
through hole 25 mm, to single ended
flange nipples or ball valve with flange,
probe attachment by clamping bush,
materials: stainless steel, graphite,
flange DN50 PN16 in conformity with DIN,
installation length L 70 mm
b004/110
Probe guide piece
drawing 5
Probe guide piece
drawing 2
Probe guide piece
drawing 1
