Model 2110-2116 Flanged Reaction Torque Sensor - Honeywell Sensing and Control - #1

Text version of the page

Flanged Reaction Torque Sensor Model 2110-2116 DESCRIPTION Model 2110-2116 flanged reaction torque sensor is designed for installation between test pieces such as motors, switches, axles, or shafts and their mounting plate. These models operate and are calibrated in both directions. Nickel-plated alloy steel construction enhances durability in harsh, industrial environments. These models have no moving parts and utilize four bonded strain gages on a special machined portion of the transducer to achieve a maximum non-linearity of 0.1% over a wide dynamic range. Typical applications include tire braking, motor dynamometers, friction-skid testing, and twist measurement. 2000 in-lb to 2400000 in-lb capacities. FEATURES • 2000 in-lb to 2400000 in-lb capacities • 0.1 % non-linearity and hysteresis • High torsional stiffness • Higher resistance to bending moments • Low-end sensitivity due to absence of moving parts Safety considerations: It would be unsafe to operate Honeywell torque sensors and load cells beyond static overload or ultimate extraneous load limits as defined in the glossary of terms or, when applicable, higher than maximum speed. When in doubt, consult factory. Honeywell is not responsible for any property damage or personal injury which may result because of the misapplication of the transducer.