ICON 300 SERIES
COMPACT REFRIGERATION CASE & COLDROOM CONTROLLERS
SPECIFICATION DATA
‘HotKey’ – Allows for multiple controller programming. Dual Probe types (NTC 2k and PT1000). Low Humidity mode to keep the fan of the refrigeration plant running.
APPLICATIONS
Refrigerated Cases & Coldrooms Food Retailers Food Processing Factories Distribution Warehouses
GENERAL
The Honeywell Icon 300 Series measure, display and control the temperature and lighting of refrigerated cases and coldrooms. They operate with up to three 2k NTC or PT1000
probes (air-on, air-off and evaporator
probes), and has up to six relay outputs (alarm, auxiliary, light, compressor, defrost and fan). The Icon 300 series has a RS485 connection to enable the controller to interface to Honeywell Genus® Network. The Icon 300 series comes in three variants: Icon 343C – 4 relays, fast-on spade terminals Icon 363C – 6 relays, fast-on spade terminals Icon 363CS – 6 relays, screw terminals The controller’s operating parameters are configurable using an eight-button keypad on the front of the temperature display. Access to the configuration parameters menu is achieved through the front panel keyboard by following a security procedure, after which the required parameter values can be set quickly and easily.
CONTROLLER FUNCTIONS
Honeywell Genus
®
Network
The two Icon controllers have Honeywell Genus® Network communication protocol as standard which allows logging onto a Honeywell Genus® network for remote alarm monitoring and defrost control. With Icon connected to the front-end monitor via the Honeywell Genus® Network it offers complete integration into Honeywell Genus® monitoring systems. This gives the advantage of: Compatibility with existing installations allowing quick and efficient upgrade to new monitoring & control solution. Icon 343C and 363C/CS have been specifically developed to work either on the Honeywell Genus® Network or stand-alone mode.
Programmable Hotkey
The Icon controller also has an optional programmable HotKey (Part Number: ICON-KEY3). It is possible to upload the parameter configurations of the controller to the HotKey, or vice-versa to download parameter configurations from the HotKey to the controller.
FEATURES
Up to six relay outputs (alarm, auxiliary, light, compressor, defrost and fan). Controls the temperature through weighted average of the Air-On / Air-Off
probes in order to maintain a set value. Honeywell Genus® network - Can be linked to a Honeywell central supervisor for central monitoring, logging and defrost scheduling. Internal real-time clock for upto 6 scheduled defrost cycles per 24 hours. Defrost cycles can also be controlled via a Honeywell front-end system. Time based light control. Displays messages, values and alarms.
Copyright © 2005 Honeywell Control Systems Ltd. All Rights Reserved EN0B-0014UK07 R1005
