Unit and Clamping Element Catalogue
60Pages

{{requestButtons}}

Catalog excerpts

Unit and Clamping Element Catalogue - 1

Unit and Clamping Element Catalogue

Open the catalog to page 1
Unit and Clamping Element Catalogue - 3

02 HOMAG, WEEKE, WEINMANN An overview of the companies 04 Units 06 Unit interfaces 08 Processing unit technology 10 Sawing units 12 Drilling / trimming units 16 FLEX5/FLEX5+ 18 Solid wood processing 20 Edge finish processing 24 Timber house construction 26 Gluing technology 56 Processing unit compass 32 Clamping systems 34 K table 42 AP table 46 Aluminium table / Grid table 48 MATRIX table 50 O-TRIX table 52 Non-standard clamping elements Contents Units and clamping elements 03

Open the catalog to page 3
Unit and Clamping Element Catalogue - 4

Your partner for solutions worldwide As leader in technology and innovation, the HOMAG Group aspires to be faster and more innovative than its competitors in the development of new machines, plants and units. To achieve this ambition, direct proximity to our customers is more important today than ever before. Because it is from intensive dialogue with users that new products with the focus on customer benefit are born. Through the lifeline | service, our expert employees on the ground ensure optimum customer support over the entire life cycle of our plants and machines: From determining...

Open the catalog to page 4
Unit and Clamping Element Catalogue - 5

WEEKE – over 60 years of experience On October 1st, 1945 Gustav Weeke & son founded a metalworking shop in Herzebrock. In 1954, WEEKE deve-loped the world's first lock insertion machine which was capable of perfor-ming all the necessary work steps in just 5 seconds. What had been a purely family-owned company was integrated into the HOMAG Group in May 1986. Its role within the Group was to take responsibility for the strategically important specialist field of drilling, routing and assembly technology. In the meantime, ultra-modern CNC technology and networking with other production units...

Open the catalog to page 5
Unit and Clamping Element Catalogue - 6

Connections fit for the future The unit interfaces used by the HOMAG Group are ahead of their time. They feature patented technologies which allow the operating spectrum of your plant or machine to be upgraded as and when it suits you. In conjunction with the HOMAG Group unit technology, they open up practically unlimited production scope. A Torque support B C axis C Interpolating C axis D E interface 1 A 2 3 6 5 4 B C D 1 AC motor, short neck, air-cooled 2 Torque support 3 C axis 4 AC motor, long neck, water-cooled 5 Interpolating C axis 6 FLEX5(+) interface 7 E interface 7 06

Open the catalog to page 6
Unit and Clamping Element Catalogue - 7

The FLEX5 / FLEX5+ interface permits automatic adjustment of the unit's angle of incline by means of the C axis, allowing operations such as precise shift cuts (see page 16). The retainer for the 3 bolts of the highly rigid 3-point unit support also permits transmission of compressed air and fluids into the units. This is the requirement for allowing the use of, for instance, pneumatically traced units (see page 14) or the supply of fluids into units for minimum quantity lubrication when processing aluminium. Patented technologies such as the electronic interface permit the application...

Open the catalog to page 7
Unit and Clamping Element Catalogue - 8

3-point interface in monoblock design 3 highly rigid bolts linked directly to the unit housing without additional interface. This guarantees optimum transmission of forces and reduces vibrations which could impact negatively on the workpiece quality and life of the units. Power Crown Technology (patented) This angular gearing arrangement with a cylindrical pinion in involute gear teeth and a crown wheel permits: • Greater effective diameter of the gears for transmission of higher torque levels • Fewer interfaces due to lower number of components • (Gears) result in more compact units and...

Open the catalog to page 8
Unit and Clamping Element Catalogue - 9

The optimum for every application The design of the individual units can be individually adjusted to the specific production assignment and different utilization conditions. For instance to achieve improved power transmission and a higher standard of processing quality in the end product. Or in order to withstand extreme loads in multiple-shift series production. Lifetime grease lubrication Lifetime grease lubrication is ideal for units in cyclical application (processing duration generally less than 1 minute). It offers an ideal cost-to-performance ratio. During processing, the grease is...

Open the catalog to page 9
Unit and Clamping Element Catalogue - 10

Versatility – productively manufactured Our unit technology is making a big impact in the furniture and interior fittings sector with its increasing demand for individual solutions. Different design styles and structural solutions can be efficiently and economically implemented. Each one of our units is ideally coordinated for use on our processing centres with their high-speed changer systems, enabling them to cope easily with any production assignment. Vertically traced trimming unit Drilling head, 7 spindles in a 25 mm spacing pattern Sawing and snipping unit 4-spindle drilling/trimming...

Open the catalog to page 10
Unit and Clamping Element Catalogue - 11

High Performance swiveling sawing/drilling and trimming unit For sawing cuts at an angle of 0° to 90° and drilling/trimming operations at an angle of 0° (vertical) to 100° (horizontal). This permits precise-fitting shift cuts, drilling and trimming operations. The High Performance version offers sufficient stability even for light trimming work. Depending on the unit design, the cutting depth with vertical saw blade is 50 mm / 70 mm. With a 45° incline of the saw blade, a cutting depth of 43 mm / 63 mm is achievable. Swiveling sawing/drilling unit The standard unit for shift cuts and...

Open the catalog to page 11
Unit and Clamping Element Catalogue - 12

4-spindle drilling/trimming unit The 4-sided spindle outlet makes available four different drilling and trimming tools without tool change. Ideal for interior fittings and furniture construction involving different connecting and hardware holes. The highly rigid monoblock design and crown wheel toothing (Cylkro gear) even allows light trimming work to be performed. The maximum useful length of tools is 50 mm / 55 mm. Drilling head, 7 spindles in a 25 mm spacing pattern Specifically for the office furniture sector, 7 holes can be drilled simultaneously at any angle. As an addition to the...

Open the catalog to page 12
Unit and Clamping Element Catalogue - 13

Processing of aluminium with minimal quantity lubrication through the unit / the bolts of the highly rigid 3-point support. High Performance sawing/drilling and trimming unit This High Performance design combination unit offers higher performance reserve and is also suitable for the continuous use of two tools for drilling, trimming and sawing. The maximum cutting depth is 80 mm or 75 mm. The maximum useful tool length for trimming and drilling is 85 mm or 70 mm. Trimming tool holder with jet for compressed air and fluids For trimming operations combined with compressed air feed, for...

Open the catalog to page 13

All HOMAG Group catalogs and technical brochures

  1. CENTATEQ N-500

    24 Pages

  2. SAWTEQ B-400

    31 Pages

  3. SAWTEQ B-300

    31 Pages

  4. SAWTEQ B-200

    19 Pages

  5. SAWTEQ B-130

    15 Pages

Archived catalogs

  1. K 320

    24 Pages

  2. Batch size 1

    8 Pages

  3. airTec

    2 Pages

  4. reacTec

    8 Pages

  5. FKF 200

    2 Pages

  6. FPL_614-624

    12 Pages

  7. 14513

    14 Pages

  8. LeanFactory

    8 Pages