Group: HOMAG Group
Catalog excerpts
Sizing and Edge Banding Machines Optimat KFL 525 and KFL 526 Optimat profi line power line
Open the catalog to page 1The New Optimat Series: Unrivalled benefits • 20% greater output coupled with 10% cost savings • Output up to 30 cycles/min. • Flexibility through a wide choice of units • High degree of automation • Even better processing quality • I-tools for improved processing quality and reduced extraction costs 4
Open the catalog to page 4The new Optimat series For the very first time, no-compromise high-performance engineering excellence handed down directly from industry has been made accessible at an affordable price. The new Optimat series offers even greater performance and important further detail improvements. The basic machine of both Optimat models is identical, encompassing sizing, trimming and gluing functions. The new closed design offers not only cost advantages but improved quality, safety and noise conditions too. Benefits of the basic machine • Lower-cost entry due to modular construction • Optimum adjustment...
Open the catalog to page 56 Sizing section Optimat KFL 526 Optimum workpiece processing Hogging and trimming The new Optimat series features a compact, space-saving design. The basic machine is fitted with a high-performance compact double hogger (KD 10 with 2 motors in the Optimat KFL 525, KD 11 with 3 motors in the Optimat KFL 526) which ensures splinter-free panel sizing. Now also with the I-System. Lower workpiece width of the KFL 525 series The two chain tracks can be moved so close together that workpieces from as narrow as 195 mm can be processed. Improved workpiece overhang adjustment The workpiece overhang...
Open the catalog to page 6Gluing The A3 gluing unit permits the use of widely differing edging materials without the need for resetting work. The relevant decentral control unit is linked to the main control system by fibre optic cable in order to avoid electromagnetic interference. The benefits in detail: • 2 – 24-slot magazine • Minimum possible edging material length: 100 mm; This means that no excess edging material lengths are required even for narrow parts such as drawer fronts (material savings) • Edging material savings also due to minimal lengthways edge overhang. This can be partially removed already while...
Open the catalog to page 7Wide range of finish processing and finish units to choose from Snipping devices A range of compact, multi-functional and hardwearing units are available for snipping overhanging edges. Rough trimming unit For rough trimming the upper and lower edge overhang. Trimming unit For trimming the chamfer or radius. Profile trimming There is a wide selection of different profile trimming units available. The FK 21, for instance, is a path-controlled high-performance unit with separate decentral control for feed rates of over 30 m/min. (Optionally available is also the FK 23 with an automatic 8-slot...
Open the catalog to page 89 I-System I-tools deflect the chips away from the tool cutting edge and dispose of them at a pick-up rate of over 97% even at low extraction speeds. The I-system markedly improves not only process reliability, the working environment and productivity, but also reduces energy costs used for extraction. Belt sanding unit KS 10 With oscillating device and pneumatic belt cleaning jet to enhance the service life of sanding belts. Optionally with automatic adjustment for different edging thicknesses and torn belt monitoring. Chamfer/radius sanding unit PS 41/PS 42 For sanding chamfers and radii...
Open the catalog to page 910 Extension as the need arises The machines of the new Optimat series are designed as a first machine (Optimat KFL 525 for longitudinal throughfeed) and second machine (Optimat KFL 526 for longitudinal and transverse throughfeed). The Optimat KFL 526 can also be equipped without problems to permit a first and second workpiece pass. Tailor-made plant concepts
Open the catalog to page 1011 Capacity is the deciding factor If you begin, for example, with an Optimat KFL 526 as a single machine, and your capacity requirement then increases, this machine can be simply combined with an Optimat KFL 525 and extended to create a complete machine line. When you invest in the new Optimat series, you are acquiring reliable, leading Homag technology to the very highest standard of quality. And all at an amazing cost-to-performance ratio within a gratifyingly short delivery and installation period.
Open the catalog to page 11The control system – fast, reliable and easy-to-operate 12 Outstanding economy In conjunction with the wide range of available units with automation capacity, almost all resetting processes can be controlled centrally from the control desk, eliminating the issue of resetting times and paving the way for the economical production of even minimal batch sizes. Operating convenience Programming and operating an edge banding machine has never been so easy and convenient. The new control system with flat colour monitor and dust-proof PC keyboard offers maximum operating ease is based on the...
Open the catalog to page 12It pays to be a Homag customer Homag is everywhere A well-developed servicing, sales and dealer network means even greater proximity, rapid response and improved customer support – all over the world. Practically-oriented training Although Homag products are designed for outstanding operating simplicity, thorough training does help cut down on commissioning times, reduces scrap from trial and error, helps develop the skills of the operator and generally improves efficiency. With this aim in mind, customer training courses are held in a number of languages in our own training centre. Careful...
Open the catalog to page 1415 Specifications Optimat KFL 525/KFL 526 Optimat KFL 525 (Line version machine I) Optimat KFL 526 (Individual machine / Line version machine II) Overall length Sizing section Overall height when open Overall height when closed Working height Overall height when open Overall height when closed Working height Gluing section Free space, finish processing section Overall length Sizing section Gluing section Free space, finish processing section Specification and photo details without commitment. We reserve the express right to make changes in the interests of progress. Optimat Set-up...
Open the catalog to page 15All HOMAG Group catalogs and technical brochures
-
EDGETEQ S-200 | S-300
56 Pages
-
B-520/540BEAMTEQ B-560/660
17 Pages
-
CENTATEQ N-500
24 Pages
-
HPS 320 flexTec
8 Pages
-
SAWTEQ B-300 multiTec
11 Pages
-
The 6 series: HKL 600
15 Pages
-
SAWTEQ B-400
31 Pages
-
SAWTEQ B-300
31 Pages
-
SAWTEQ B-200
19 Pages
-
SAWTEQ B-130
15 Pages
-
Panel dividing saw SAWTEQ B-130
15 Pages
Archived catalogs
-
Material in motion
21 Pages
-
K 320
24 Pages
-
Batch size 1
8 Pages
-
Throughfeed saws
20 Pages
-
airTec
2 Pages
-
reacTec
8 Pages
-
FSL 310, 320, 330
20 Pages
-
FKF 200
2 Pages
-
K 600 Edge Banding Machines
40 Pages
-
FPL_614-624
12 Pages
-
14513
14 Pages
-
Edge banding machines K 520
32 Pages
-
Edge banding machines KAL 300
28 Pages
-
Processing centre Venture 12
8 Pages
-
HOMAG Transport Systems
12 Pages
-
Processing centres BMG 500/600
36 Pages
-
Double-end tenoner FPL 220
2 Pages
-
Postforming VFL 310
2 Pages
-
LeanFactory
8 Pages
-
2200 edge banding machines
26 Pages
-
K 600 Edge Banding Machines
40 Pages
-
Processing Centers B200/300
28 Pages