Submersible waste water pumps - HOMA Pumpenfabrik - (Version JPG) - PDF Catalogue | Technical Documentation

See other catalogues for HOMA Pumpenfabrik

Centrifugal pump, Cleaning system, Pump controller, Axial flow impeller, Submersible pump

Text version of the page

PUMP TECHNOLOGY

Submersible waste water pumps Discharge R 3'' / DN 80.

Single channel impeller, spherical clearance 50 mm.

TP 53 M

Application

Performances

HOMA TP 53 series pumps are suitable for pumping drainage water or waste water. With 50 mm spherical clearance they are able to pump liquids with larger suspended solids like fibres, textiles etc. They are used for various applications in public and private sector, trade and industry.

DIN EN 12050-2: Conformity and design approved and controlled by LGA, certificate No. 0220119.

Installation: Transportable or permanent. Models with float switch control for automatic pump operation, depending on medium level in the sump.

Pumped liquid: Clear water and drainage water, sewage containing soft solids. Max. liquid temperature: 35°C short term up to 60°C.

Operation: Intermittent.

Design

Fully submersible, compact integrated motor-pump unit consisting of:

Pump: Single stage centrifugal pump with horizontal discharge BSP3"M.

Impeller: M = Closed single channel impeller for liquids containing impurities and sludge with solid particles. Spherical clearance 50 mm.

Motor: Fully submersible, pressure tight electric motor. Insulation class F. Degree of protection IP 68. Thermal sensors embedded in the winding on request (standard with TP53M50 and model Ex).

Motor Start:

TP53M12-37: Direct-on-line

TP53M50: Direct-on-line or Start-delta-start

Cable:

TP53M12-37: H07RN-F 4 G 1,5 TP53M12-37Ex: H07PLUS 6 G 1,5 TP53M50(Ex): H07RN-F(PLUS) 10 G 1,5 Shaft/Bearing: Large diameter stainless steel rotor shaft, pre-lubricated bearings.

Seals: Combination of mechanical seals (silicon-carbide/silicon-carbide) in a separate oil chamber. Models up to 1,6 kW/2-pole with mechanical seal and lip seal. Oil inspection from outside.

Technical Data

Curve Pump type

Motor Motor Capacitor* Speed Nominal Spherical Weight (kg)


No.	input	output	(uF)	(rpm)	current	clearance	Standard	Model
	P₁ (kW) P₂ (kW)				(A)	(mm)	model	Ex
© TP53 M12/2W(A)(Ex)	1,1	0,8	25	2900	4,8	50	26	31
© TP53 M17/2W(A)(Ex)	1,6	1,2	30	2900	7,6	50	27	32
© TP53 M11/2D(A)(Ex)	1,0	0,8		2900	1,9	50	26	31
© TP53 M14/2D (A)(Ex)	1,3	1,0		2900	2,5	50	27	32
© TP53 M23/2D (A)(Ex)	2,3	1,8		2900	3,8	50	40	40
© TP53 M26/2D (A)(Ex)	2,6	2,1		2900	4,5	50	40	40
© TP53 M37/2D (A)(Ex)	3,7	3,2		2900	6,5	50	45	45
© TP53 M37/2MD (Ex)	4,0	3,4		2900	6,6	50	45	45
© TP53 M37/2HD (A)(Ex) 3,7		3,2		2900	6,5	50	45	45
© TP53 M50/2 DT (DEx)	5,2	4,4		2840	8,7	50	56	56
© TP53 M12/4W(A)	1,2	0,9	40	1450	5,8	50	40	40
® TP53 M13/4D(A)(Ex)	1,3	1,0		1450	2,6	50	40	40

Model W: 230-240 V / 1 Ph Model D: 400-415 V / 3 Ph * Capacitor: For the operation it is necessary to install a capacitor in the

Model A: With automatic level control HOMA-Nivomatik Model Ex: Explosion proof control box.


	Materials:
	Motor housing,
	pump housing	Cast iron GG 25
	Impeller
	- up to 1,6 kW/2-pole	Polypropylene GFK
	- other types	Cast iron GG 25
	Wear ring	Bronze
	Mechanical seal	Silicon-carbide
	Rotor shaft, screws	Stainless steel
	Seal kit	Perbonane

Model W (230-240 V/1 Ph): 10 m of cable. Control box W19; WT19 available as accessories.

Model D (400-415 V/3Ph): 10 m of cable. Control box D32; DT32 available as accessories.

Model A: With additional automatic level control and control box WA10/19; DA10/32; DA10/12 with overload protection, manual-auto switch and 10 m of cable. 1Ph-model with integrated capacitor. Model Ex with intrinsically safe relay.

Equipment supplied

Pumps with base stand, without auto-coupling (see accessories):

Submersible waste water pumps - HOMA Pumpenfabrik - #1

Centrifugal pump, Cleaning system, Pump controller, Axial flow impeller, Submersible pump