Catalogue - submersible drainage pump - HOMA Pumpenfabrik

See other catalogues for HOMA Pumpenfabrik

Impeller, Sanitary pump, Agitator impeller, Self-priming pump, Diaphragm pump

Text version of the page

HÇMR

PUMP TECHNOLOGY

Jacket cooled

submersible drainage pump for clear water

Application

The C 80 scavenger is suitable for irrigation, water transfer and drainage in clear water. For flat-water exhaust to min. 2 mm. Pumping water from collection tanks, for flood relief and water removal from water courses or reservoirs. Suitable also for water circulation in garden ponds and cascades.

The water jacket cooled motor with the top discharge protects the motor against overheating even during sip operation.

Installation: Permanent or transportable.

Pumped liquid: Clear water containing soft solids with a diameter of max. 1 mm. Max. liquid temperature: 35°C, short term up to 60°C.

Operation: Permanent (S1).

Design

Fully submersible pump consisting of:

Pump: Single stage centrifugal pump with vertical discharge BSP ³/4" M.

Impeller: Open multi-channel impeller, spherical clearance 1 mm.

Motor: Canned wet-rotor, seal-less, rotor shaft lubricated by pumped liquid. Insulation class B. Motor protection IP 68.

Shaft/bearing: stainless steel-ceramic shaft, slide bearing.

Cable: H05RN-F3G0,75

Technical Data

Pump type

Motor-input P1 (kW)

Motor-output P2 (kW)

Voltage 50 Hz

(V)

Nominal current

(A)

Cable length (m)

Weight (kg)

С 80 W

230-240 /1Ph 0,8

0,09

0,05

2,5


Speed: 2900 rpm		Discharge: BSP з/₄" M
Materials:		Equipment supplied
Motor housing,	Stainless steel	Pump with 10 m of cable and plug.
motor shaft, screws		Pump with 10 m of cable and plug.
Suction sieve,	Wear resistant
Pump housing	synthetic mate-
	rial (composite)
Impeller	Glass-fibre, rein-
	forced synthetic
	material
	(composite)

Elastomere

NBR

submersible drainage pump - HOMA Pumpenfabrik - #1

Impeller, Sanitary pump, Agitator impeller, Self-priming pump, Diaphragm pump