Type HBDBase Drum Heaters
Advantages: Technical Data:
The HBD
heater is specifically designed formelting or reducing the viscosity of soaps, fats,
waxes, varnishes and oil based type of products.
The diameter of the base enables use on all
sizes of drums up to 45 gallons (200 Lt). Heat is
provided by a 900W silicone rubber insulated
heater mat, providing an even distribution of
heat to the base.
If a rapid heat up is required or solid mediums
are involved requiring higher power input, side
drum
heaters can be used in conjunction with
the HBD; alternatively a thermally insulated
jacket can be used. Power Rating:110 or 230 Volts 900 Watts Temp. Control:0 to 150°C Supply Lead:2 Metres flexible armoured Platen:Height 70mm, Diameter top 550mm, Base 600mm Control Unit:Height 105mm, Protrusion 280mmOverall Unit:880mm long, 600mm wide, 105mm high
Health and Safety: Construction:
All HBD
heaters are manufactured to conform to the EEC low voltage and EMC directives and CE marked accordingly. Care should always betaken to ensure the drum is adequately
ventilated before applying heat. Manufactured from 2mm thick mild steel for
extra rigidity on uneven surfaces with tapered
edges for safe ease of drum location and is
protected by a resilient high temperature
coating. Temperature adjustment is via a rear
aperture in the control unit, with neons
indicating power on and load switching viewed
through a window in the control unit top.Heat is supplied via a silicone insulated etchedfoil
heater giving a uniform temperature across
the platen face. Insulated with 50mm of high
density rock wool, heat transference to the base
is minimal.
Customer Support:
Established in 1972 Holroyd have been providing
surface heating solutions for customer requirements
throughout the world. As Europe’s largest
specialised silicone rubber
heater manufacturer our
experience and product range is vast. For detailed product information please visit us
at www.holroydcomponents.com or contact our
technical sales team.
sales@holroydcomponents.com
