Text version of the page

M

OUNTING

O

PTIONS

COMPACT® Pendant Arm Series 4

Bulletin

CS4

Rotation LImiter

Ø

jmm (in.)Weight (lb)

Accessory for use with wall joint, cable wall joint, and intermediate joint. Limits the rotation of these joints, which normally rotate 180 degrees. Rotation limiter provides stops in 15-degree increments. The limiter is a heavy-duty steel disk that attaches to the pivot point on each joint. Moveable stop pins provide adjustment.

Catalog NumberSystem

CCS56RL 50 and 6096 (3.77)0.8 CCS814RL 80 and 80/140119 (4.70)1.3
Operator Interface Enclosure Systems

Swivel Tilt

Catalog NumberSystemG each sidemm (in.)Weight (lb)

Mounts between suspension arm and operator interface enclosure to provide both swivel and tilt options for machine operator. Cast aluminum assembly finished with RAL 7035 light gray polyester powder paint. Center opening for control cables. Tilt knob allows infinite tilt adjustment from horizontal to 30 degrees. Swivel allows 300-degree maximum rotation. Setscrews, seals, and enclosure mounting screws are included.

CCS5STBLG 5050 (1.97)7.0 CCS6STBLG 6060 (2.36)7.0 CCS8STBLG 8080 (3.15)7.0 Not recommended to be used in combination with base with cutout for sloped top PBSK66 or PBSK66SS.

NOTE: Maximum load for overhead applications is 110 lb (50 kg).

Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com © 2007 Hoffman Enclosures Inc.

OI-101