Text version of the page

W

ALL

-M

OUNT

D

Disconnect Enclosures - 13627 Type 12 and Type 13 Enclosures for Flange-Mounted Disconnects

ISCONNECT

E

NCLOSURES

Bulletin

A25

Disconnect Mounting Space

Disconnects will occupy space on panel shown by dimensions E1, F1, and G1 in Disconnect Mounting Space diagram. Wiring space W1 is available when disconnect is installed in the enclosure.E1 = 4.75 in. (121mm) when C = 8.00 in (203mm) E1 = 7.09 in. (180mm) when C =10.00 in (254mm) E1 = 11.62 in. (294mm) when C = 12.00 in (305mm) E1 = 11.62 in. (294mm) when C = 16.00 in (406mm) E1 = 18.38 in. (467mm) for A60SA3812A24LP W1 = Wiring Space. See Technical information for wire bend space.Refer to NATIONAL ELECTRICAL CODE® 2005 article 430.10(B) for wiring space required for line side conductors to be connected to disconnect. Verify your application to determine if wiring space is adequate.
Catalog NumberDescription ASAHPDF A25 Handle Kit

A25 Handle Kit

Kit is factory installed on A25 disconnect enclosures ending in PL. Order separately for other A25 disconnect enclosures. The kit includes a zinc diecast padlocking defeater handle and all latching hardware. Keylocking and padlocking only handles are available as a custom order.
Disconnect Enclosures Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • www.hoffmanonline.com © 2007 Hoffman Enclosures Inc.

DS-5