Catalogs >
Hobart >
Auto Arc ® Toolmate ™ 100

Auto Arc ® Toolmate ™ 100
2Pages

Catalog excerpts

115V Wire Feed Welder he Auto Arc Toolmate 100 operates off 115-volt household current. With the addition of a roll of .030 –.035 in. (0.8 – 0.9 mm) flux-cored welding wire, this welder is ready to weld, without shielding gas. Includes: Comfortable 8 ft. (2.4 m) H100F2-8 gun with liner for .030 –.035 in. (0.8–0.9 mm) diameter wire Work cable with clamp .030 in. (0.8 mm) contact tips Spool shaft to accommodate 4- and 8-inch spools Power cord with plug Weld set-up chart Owner’s manual with parts list, installation, operation and maintenance guidelines Applications: Farm/Home Light Fabrication Light Maintenance and Repair Broad output range of 30 – 100 A Allows you to weld up to 3/16 in. (4.8 mm) steel with flux-cored wire. Four output voltage settings Provides a broader operating window for each wire, with quick and easy adjustment for different thicknesses and joints. Built-in contactor Eases use and excellent safety feature which makes wire electrically “cold” until trigger is pulled. Durable feed head with quick-release drive roll tension lever Positive feed with adjustable tension plus easy accessibility to thread new wire. Short circuit protection Protects unit against current overload. Self-resetting thermal overload Protects power transformer to ensure reliability. Auto Arc Toolmate 100 is warranted for twelve months from the date of purchase. SPECIFICATIONS (SUBJECT TO CHANGE WITHOUT NOTICE.) Rated Output 80 A at 18 VDC, 20% duty cycle 45 A at 16.25 VDC, 60% duty cycle 30 A at 15.5 VDC, 100% duty cycle Output Amperage Range Maximum Open-Circuit Voltage DC Wire Feed Speed Range Amps Input at Rated Output, 60 Hz, 1-Phase 115 V KVA KW

Open the catalog to page 1

PERFORMANCE DATA DUTY CYCLE CURVE OUTPUT AMPERES CONTROL PANEL DUTY CYCLE % VOLT/AMP CURVE Over Temperature Light Wire Speed Control Voltage Control Switch Power Switch H100F2-8 Replacement Welding Gun Hobart/Miller #270629 Comes in 8 ft. (2.4 m) length with liner for .030 – .035 in. (0.8 –0.9 mm) diameter wire. Small Running Gear/Cylinder Rack #194776 Designed for portable MIG welders Accommodates large and small gas cylinders. Protective Cover #770830 Weather-resistant nylon resists stains and mildew while protecting the finish of your Toolmate welder. CONSUMABLES Item Hobart Package Part...

Open the catalog to page 2