video corpo

Face Mill : AFE45 type
8Pages

{{requestButtons}}

Catalog excerpts

Face Mill : AFE45 type - 1

Face Mill AFE45 Type Grade for processing stainless-steel materials Low cutting force geometry is realized, due to unique sheet shape. Excellent chip discharge Uses carbide sheet Cast irons, aluminum alloys, steels and difficult to machine materials can be machined. Multi-flute type is also lineup.

Open the catalog to page 1
Face Mill : AFE45 type - 2

Grade for processing stainless-steel materials Newly developed PVD technology provides improved layer adhesion and reduced layer peeling due to welding. Coating is optimized for stainless steel processing with reduced coating layer damage. High-toughness substrate is used to improve chipping resistance of cutting edge. KpPn'<S^|IjiL'3N"3"o ' Provides high-performance processing and long tool life in all areas of stainless-steel material processing. Electron micrograph I Level of film remaining Cutting time(min) WMilS W Cutting Conditions Cutting Speed Speed perflute Cutting depth Single-tip...

Open the catalog to page 2
Face Mill : AFE45 type - 3

Face Mill AFE45 Type JESM Features ' A viol ri mAi it ic nnrtrl I ^™ Pv^ollont ^hin ^icrh-jmo Axial runout is good. AFE45 does not have aggravation of the axial runout by the dispersion in the tightening torque. Easy to use. Excellent chip discharge Screw clamp system ensures sufficient pocket size, so chips are smoothly discharged. " Uses carbide sheet The carbide sheet protects the cutter body if an insert should ever break, and also improves insert seating stability to provide stable tool life. ) Low cutting force geometry Low cutting force geometry is realized, due to unique sheet ")...

Open the catalog to page 3
Face Mill : AFE45 type - 4

O L] l^iPSS^tfAD^If 0 Numeric figure comes in a circle O and alphabetical character comes in a squareL [Note] The seat must be installed so that the surface indicated by %< is facing the outside of the cutter.

Open the catalog to page 4
Face Mill : AFE45 type - 5

Face Mill AFE45 Type (Hffl'fVtJ-h Insert Fig.l jHffl General purpose Low cutting force type S Hardened steels PJbSZOAosI Aluminum Alloy ^"^l^aiiz Titanium Alloy General cutting, First recommended General cutting, Second recommended Item Code JPD-h JMD-h JSD-h J P-Coated J M-Coated JS-Coated Inscribed Circle Thickness Relief Angle -A" : Stocked Items of New Products. No Mark : Manufactured upon request only.

Open the catalog to page 5
Face Mill : AFE45 type - 6

Cutting Performance Cutting force ■ Low-cutting-force shape reduces cutting force by 14% compared to competitors' conventional products. •jOMStt Cutting Conditions Work Material Tool diameter tfl'iJS Cutting length (m) • S-shaped breaker (JP4020) provides 1.7 to 2.5 times the tool life of competitors' products. •jOMStt Cutting Conditions Work Material Machine used Titanium Alloy Cutting tfl'iJBtlMl Cutting time (min) • S-shaped breaker (JP4020) provides about 3 times the tool life of competitors' products. •jOMStt Cutting Conditions Work Material Machine used aluminum alloy with small M/C •...

Open the catalog to page 6
Face Mill : AFE45 type - 7

Face Mill AFE45 Type Recommended Cutting Conditions [Note] © Use the appropriate coolant for the work material and machining shape. © These conditions are for general guidance; in actual machining conditions adjust the parameters according to your actual machine and work-piece © In order to avoid of insert breakage, please change insert earlier. © The steel chips may cause cuts, burns or damages to eyes. Be sure to install the safty cover around the tool and wear the safety glasses when © Please don't use cutting oil as coolant.(lt may be cause of fire.)

Open the catalog to page 7
Face Mill : AFE45 type - 8

x.1$(D~r—^ISiitKISS©—flW. 8; Drawings, data in tables, etc. are examples of test results. 1. Cautions regarding handling (1) When removing the tool from the case (package), be careful not to drop it on your foot or drop it onto the tips of your bare fingers. (2) When actually setting the inserts, be careful not to touch the cutting flute directly with your bare hands. 2. Cautions regarding mounting (1) When preparing for use, be sure that the inserts are firmly mounted in place and that they are firmly mounted on the arbor, etc. (2) If abnormal chattering occurs during use, stop the machine...

Open the catalog to page 8

All MOLDINO Tool Engineering Europe GmbH catalogs and technical brochures

  1. EPBTS

    12 Pages

  2. EMXR

    16 Pages

  3. EMXA

    12 Pages

  4. EPDRF-TH

    12 Pages

  5. EPDBPE-ATH

    20 Pages

  6. SCE-R

    6 Pages

  7. RV type

    12 Pages

  8. ABPFN type

    6 Pages

  9. TD4N type

    8 Pages

  10. EHHB-ATH

    8 Pages

  11. EPCDS

    4 Pages

  12. GALLEA series

    24 Pages

  13. WHMB-TH

    12 Pages

  14. EPDRE-ATH

    24 Pages

  15. CBN-EHB

    12 Pages

  16. EHHBE-TH3

    8 Pages

  17. TD6N type

    12 Pages

  18. EB4HR-ATH

    12 Pages

  19. EHX

    12 Pages

  20. EPHB-PN

    8 Pages

  21. EHHRE-TH3

    8 Pages

  22. EDT

    16 Pages

  23. EHSE-TH

    8 Pages

  24. NSB

    12 Pages

  25. WHNSB-TH

    20 Pages

  26. EMSBS

    8 Pages

  27. GS4TN type

    4 Pages

  28. ABP4F

    8 Pages

  29. EPDBEH-TH3

    20 Pages

  30. JM4060

    4 Pages

  31. GX2140

    4 Pages

Archived catalogs

  1. CBN End Mills

    20 Pages

  2. Cutters

    10 Pages

  3. Reamers

    16 Pages

  4. HSS End Mills

    98 Pages

  5. Indexable Tools

    160 Pages