video corpo

Epoch Micro Drill?EMD
24Pages

{{requestButtons}}

Catalog excerpts

Epoch Micro Drill?EMD - 1

End hllll & Drill Buries for Micro Ml'dohlnlny Epoch Micro Drill Other end mills for micro-machining Epoch Micro End Mill Hitachi Tool Engineering, Ltd.

Open the catalog to page 1
Epoch Micro Drill?EMD - 2

Epoch Micro Serie Features & Usages Epoch Micro End Mill

Open the catalog to page 2
Epoch Micro Drill?EMD - 3

• Micro-TH coating is super-smooth coating developed for micro-tool required higher accuracy. •Micro-TH coating realized higher performance even in micro-tool (under 0.1mm) due to less macro-particle. •The characteristic is the same of conventional TH coating. (Oxidizing temp.: 11001C Layer hardness : 3600HV) Comparison of coating surface conditions Comparison of coating condition for 3ku xaaa 2G»n, esee la/SEpyes ■ zeku xaaa zawm eeea 89/SEP/es High accuracy shank standard

Open the catalog to page 3
Epoch Micro Drill?EMD - 4

Technical data Field data Micro carving Work Tool Size Cutting conditions Carving height Direct machining of Sintered High-speed Tool Steel Work Tool Size Cutting conditions Roughing Finishing of micro lens Work Tool Size Under neck Cutting conditions Epoch Deep Ball Competitor's Ball End Mill

Open the catalog to page 4
Epoch Micro Drill?EMD - 5

Technical data Tool Size Cutting conditions Technical Data Machining of micro fluid chip Epoch Micro Series Tool Size Other End Mills for Micro-machining Cutting conditions Machining part Using Tool Feed rate Roughing Semi-finishing Finishing Roughing Semi-finishing Finishing

Open the catalog to page 5
Epoch Micro Drill?EMD - 6

Connector electrode processing Tool Size Under neck length Cutting conditions Epoch Micro Drill Tool Size Cutting conditions MgMMRH| I Hole depth Stopping hole Large burr

Open the catalog to page 6
Epoch Micro Drill?EMD - 7

Technical data Map of Japan (Micro-slotting) Work Tool Size Technical Data Cutting conditions Cutting depth Epoch Micro Series Tool Size Other End Mills for Micro-machining Drawing of NASCA (Micro-slotting) Cutting conditions Hardened Steel

Open the catalog to page 7
Epoch Micro Drill?EMD - 8

Epoch Micro End Mill Tolerance on dia. :Right table Shank Roundness : under 0.2/jm Shank Cylindrical profile : under 0.5/jm

Open the catalog to page 8
Epoch Micro Drill?EMD - 9

Epoch Micro Series Carbide Micro Drill Epoch Micro Drill Technical Data The cutting rubbish is smoothly exhausted by adopting the Micro-TH coating. The long-lived machining is possible from the resin, nonferrous metals, and stainless steels to the alloy steel. Epoch Micro Series Micro-TH Size(mm) Item code Flute length Overall length Other End Mills for Micro-machining Stocked Items of New Products Recommended cutting conditions Mild Steels, Carbon Steels Feed rate Alloy Steels Feed rate Stainless Steels Feed rate Cast Iron Feed rate Selection of cutting conditions Please select the cutting...

Open the catalog to page 9
Epoch Micro Drill?EMD - 10

Other end mills for micro-machining (under 0.5) Epoch Deep Square Helix Angle (-TH) (Total 58 items) Size(mm) Stocked Items. Item Code Stocked Items of New Products. Under Neck Flute Length Length Overall Length Neck Interference R Angle The effective under-neck length for the various draft angles When you want to order TH coated items from us, please add the suffix -TH at the end of the item code.

Open the catalog to page 10
Epoch Micro Drill?EMD - 11

Other end mills for micro-machining (under 0.5) Recommended cutting conditions For details about the CS series, refer to work groups 1 - 4. For details about the TH series, refer to work groups 4 - 6. Carbon Steels, Alloy Steels Stainless Steels, Tool Steels Pre-harden Steels Hardened Steels Hardened Steels Ratio to standard depth of cut Under neck Length (mm) Technical Data Recommended range Epoch Micro Series Other End Mills for Micro-machining

Open the catalog to page 11
Epoch Micro Drill?EMD - 12

Other end mills for micro-machining (under R0.3) Epoch Deep Ball Helix Angle Tolerance on R :Right table R Tolerance on Dia. :Right table (-TH) (Total 60 items) Size(mm) Stocked Items. Item Code Stocked Items of New Products. Under Neck Flute Length Length Overall Length Neck Interference R Angle The effective under-neck length for the various draft angles When you want to order TH coated items from us, please add the suffix -TH at the end of the item code.

Open the catalog to page 12
Epoch Micro Drill?EMD - 13

Other end mills for micro-machining (under R0.3) Recommended cutting conditions For details about the CS series, refer to work groups 1 - 4. For details about the TH series, refer to work groups 4 - 6. Recommended range Carbon Steels, Alloy Steels Stainless Steels, Tool Steels Pre-harden Steels Hardened Steels Hardened Steels Ratio to standard depth of cut Mill Dia. Under neck Length Standard depth (mm) (mm) of Cut (mm) Technical Data Epoch Micro Series Other End Mills for Micro-machining

Open the catalog to page 13
Epoch Micro Drill?EMD - 14

Other end mills for micro-machining (under R0.3) Epoch Pencil Deep Ball R2 or higher does not have backdraft shape. Tolerance on R :Right table Helix Angle R Back taper on peripheral edge Tolerance on Dia. :Right table (Total 16 items) Size(mm) Item Code Under Neck Length Stocked Items. Neck Angle Flute Length Under Overall Neck Dia. length Stocked Items of New Products. Approx Interference neck length Angle The effective under-neck length for the various draft angles.

Open the catalog to page 14
Epoch Micro Drill?EMD - 15

Other end mills for micro-machining (under R0.3) Recommended cutting conditions Carbon Steels, Alloy Steels Stainless Steels, Tool Steels Pre-harden Steels Hardened Steels Hardened Steels Ratio to standard depth of cut Mill Dia. Under neck Length (mm) (mm) Neck Angle ( ) Technical Data Epoch Micro Series Other End Mills for Micro-machining

Open the catalog to page 15
Epoch Micro Drill?EMD - 16

Other end mills for micro-machining (under R0.3) Epoch Super Hard Ball R accuracy High-accuracy rating product Standard rating product Under neck length 1.5D type Size(mm) Item Code High-accuracy rating product Standard rating product Flute length The effective under-neck length for the various draft angles Under neck Overall length length Incline angle Under neck length 3D type Size(mm) Item Code Standard rating product Flute length The effective under-neck length for the various draft angles Under neck length Overall length Incline angle Stocked Items. Recommended cutting conditions...

Open the catalog to page 16
Epoch Micro Drill?EMD - 17

Other end mills for micro-machining (under 0.5) Epoch Deep Radius Technical Data Back taper on peripheral edge Helix Angle (Total 18 items) Size(mm) Under neck length Flute length Actual effective length in incline angles Neck dia. Overall length Interference angle Epoch Micro Series Item code Other End Mills for Micro-machining Stocked Items. Stoked Items of New Products.

Open the catalog to page 17

All MOLDINO Tool Engineering Europe GmbH catalogs and technical brochures

  1. EPBTS

    12 Pages

  2. EMXR

    16 Pages

  3. EMXA

    12 Pages

  4. EPDRF-TH

    12 Pages

  5. EPDBPE-ATH

    20 Pages

  6. SCE-R

    6 Pages

  7. RV type

    12 Pages

  8. ABPFN type

    6 Pages

  9. TD4N type

    8 Pages

  10. EHHB-ATH

    8 Pages

  11. EPCDS

    4 Pages

  12. GALLEA series

    24 Pages

  13. WHMB-TH

    12 Pages

  14. EPDRE-ATH

    24 Pages

  15. CBN-EHB

    12 Pages

  16. EHHBE-TH3

    8 Pages

  17. TD6N type

    12 Pages

  18. EB4HR-ATH

    12 Pages

  19. EHX

    12 Pages

  20. EPHB-PN

    8 Pages

  21. EHHRE-TH3

    8 Pages

  22. EDT

    16 Pages

  23. EHSE-TH

    8 Pages

  24. NSB

    12 Pages

  25. WHNSB-TH

    20 Pages

  26. EMSBS

    8 Pages

  27. GS4TN type

    4 Pages

  28. ABP4F

    8 Pages

  29. EPDBEH-TH3

    20 Pages

  30. JM4060

    4 Pages

  31. GX2140

    4 Pages

Archived catalogs

  1. CBN End Mills

    20 Pages

  2. Cutters

    10 Pages

  3. Reamers

    16 Pages

  4. HSS End Mills

    98 Pages

  5. Indexable Tools

    160 Pages