Catalogs >
MOLDINO Tool Engineering Europe GmbH >
Ceramic End Mill -Corner R type

Ceramic End Mill -Corner R type
4Pages

Catalog excerpts

Mold making Parts processing Roughing High efficient side milling Side cutting -Corner R type SCE-R Achieves high-efficiency machining for superalloy! Achieves cutting speed of vc=800m/min.! SCE-R φ6～φ12 (4 Items) Patent pending

Open the catalog to page 1

Technology Applications & Product concept ・Achieves ultra-high-efficiency machining for superalloy. ・The tools employ a special silicon nitride ceramics with excellent heat resistance that can withstand flute tip temperatures of more than 1000°C. ・Cutting can be performed at much higher speeds than are normally used. By achieving cutting in the softening temperature region of the work material, tool life is greatly improved. Cutting region of Ceramic End Mill (Softening temp. region of superalloy) 700 Cutting region of Carbide End Mill Superalloy known as a difficult-to-cut material is a...

Open the catalog to page 2

: Stocked items. Cutting conditions Work material : Superalloy Field Data Side milling using Ni-based superalloy - Comparison of processing efficiencies of ceramic end mills and carbide end mills - machining performance!! Ceramic End Mill 010/6 flutes Carbide End Mill 010/4 flutes

Open the catalog to page 3

Re-grinding compatibility range table Item Code Ceramic End Mill Corner R type Re-grinding compatibility range(mm) Since regrinding consists of cutting off the used section and re-manufacturing the shape, the overall tool length will be changed greatly. (For details, contact our sales office.) Cautions on use ・Dry (air blow) cutting is recommended. ・Use of hydro chucks (hydraulic holders) or shrink-fit holders is recommended. ・Down cutting is recommended. ・Continuous cutting is recommended and interrupted cutting should be avoided as much as possible. ・When tool goes into the work material,...

Open the catalog to page 4