Text version of the page

Fixturing System

4000 4

CONTENTS Operation

Most tools are supplied together with an operating manual.Correct operation cannot be ensured and danger to personnel and machine cannot be excluded unless these operating in- structions or information given in this catalogue are observed. mm Fixturing System 4000 In Use 2 mm Accuracy, Quality, Cleaning, Warranty 3
). mm Introduction 4 mm Selection of Clamping Devices 5

Precision

The individual tool planes incorporate hardened and precision ground X and Y centering prisms and separate Z-supports. This assures position centering of each tool with a repetitive accuracy (consistency) of

Service and Maintenance

Since the Fixturing System is subject to chemical and physicalinfluences, maintenance and service has to be performed withspecial care. The current flow requires a good connection (contact) between beams and workpiece holders. The conductivity of the water along with chlorides normally contained in water, can influencethe rust-resisting property of the Fixturing Systems.Residues from electrical discharge process especially copper particles which can develop secondary EDMing (corrosion), must be removed once a day. Never use abrasive products. Only use a clean and soft cloth. For maintenance we recommendCONTROXID (page 25) or NERV-DUL (available in US market). mm Beams 11 mm Insulating Set, Support Holders, Countersupport 12 mm Clamping Jaw Set 13 mm Presetting Stations 14–15 mm Clamper 16 mm Pallets 17 mm Vises, Spacers 18–19 mm Prism Vises and Holders 20–21

Technical Modifications

mm Vertical Chuck Jaws, Clamping Inserts 22–23
All products shown in this catalogue are subject to ongoing im-provements and developments; we reserve the right to make modifications without notice. mm Uniholder 24 mm Miniholder, Adhesive, Anticorrosive 25

Quality according to DIN EN ISO 9001:2000

mm Basic Holders, Beam Vise Kits,
All HIRSCHMANN GMBH products are produced using state of art production methods. They are subject to quality assurance measures as per DIN EN ISO 9001:2000 both during produc- tion and in the assembly stage. Clamping Beam, Prism Set 26–27 mm Pallet Clamper and Adapter Peg Rotating Unit, Vertical Unit 28 mm Reference Pallet, Shank Clamping Chuck 29

Warranty

mm Customized Holders 30–31
We provide a 12 months warranty for all Fixturing System parts, starting from the invoice date, and assuming correct use and maintenance as specified has been observed. The warranty is restricted to replacement or repair, free of char- ge, of any defective parts. Claims arising from improper use orhandling shall not be considered.Warranty claims shall be submitted without delay and in writing. mm Rotary Indexing Tables and A-Axes 32 mm Rotating Spindles and Control Units 33 mm EROBOT – Workpiece Changer 35
HIRSCHMANN GmbH 3