Couplers with Connectors (H Type) - Hirose Electric - #1

Text version of the page

14 Couplers with Connectors (H Type) HDH Series Features 1.High Performance The high frequency characteristics feature extremely low loss, a high degree of matching, and high isolation. 2.Power Uniform Distribution and 90°Phase Difference Type This is a one input, two output (or two input, one output) power uniform distribution type having a 90°phase difference between the two outputs (or two inputs). 3.Miniature and Lightweight Corrosion-resistant aluminum is used for the case and the Hirose Electric original pattern design, which uses a stripline triplate method, enables the couplers to be miniature and lightweight. 4.Couplers with SMA Connectors Use of SMA connectors (Hirose Electric HRM Series) which feature stainless steel for the exterior cladding make these couplers durable. Product Specifications Note: The frequency range and the maximum input power will differ depending on the products. The test method conforms to MIL-STD-202. Materials Ratings Frequency range (Note) Characteristic impedance Maximum Input Power (Note) 0.5 to 14.5 GHz 50 ohm 2 to 50 W Operating temperature range Operating relative humidity -10ç to +65ç 95% Max. Item Standard Conditions 1.Vibration Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm, acceleration of 98 m/s2 for 2 hours in each of 3 directions 2.Shock Acceleration of 490 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis 3.Temperature cycle No damage, cracks, or parts dislocation Connector Body Stainless steel Passivated Connector female contacts Beryllium copper Gold plating Connector Insulator PTFE --------- Case Aluminum Coating Board Dielectric Gold plating Part Material Finish HDH-00803GHD(40) HDH-01503GHD(40) HDH-01503GH(40) HDH-03003GHD(40) HDH-06003GHD(40) HDH-09003GHD(40) HDH-12803CHD(40) Temperature : _55ç  +15ç to +35ç  +85ç  +15ç to +35ç Time : 30  15 max.  30  15 max. (Minutes) 5 cycles No electrical discontinuity of 1 ìs or more No damage, cracks, or parts dislocation The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 04/2009