See other catalogues for
Hirose Electric
You may also be interested in
Text version of the page
36
2 GHz Band Power Dividers/Combiners
C/D Series
Features
1.Division System
The micro stripline method, which uses the
principle of the /4 impedance converter, provides
excellent high frequency performance.
2.High Performance
The low insertion loss and high isolation (of over 20
dB) afforded by the Wilkinson circuit structure make
these power dividers ideal for use in portable
telephone base stations, measuring instruments,
and for measurements.
3.Highly Reliable Design
Connectors are of the SMA type and use stainless
steel for extremely high performance.
The case uses corrosion-resistant aluminum and is
both miniature and lightweight.
Product Specifications
Please see the specification items for details concerning insertion loss, VSWR, and isolation.
The test method conforms to MIL-STD-202.
Materials
Ratings
Frequency range
Characteristic impedance
Maximum Input Power
1.7 to 2.3 GHz
50 ohms
1 to 20W
Operating temperature range
Operating relative humidity
-10ē to +65ē
95% Max.
Item Standard Conditions
1.Vibration
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 axis
2.Shock
Acceleration of 294 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature: -40ē +15ē to +35ē +85ē +15ē to +35ē
3.Temperature cycle Time: 30 2 to 3 max. 30 2 to 3 max. (Minutes)
100 cycles
Connector Body Stainless steel Passivated
Connector female contacts Beryllium copper Gold plating
Connector Insulator PTFE ----------
Cover Aluminum Conductive white alumite
Case Aluminum Conductive white alumite
Board Dielectric Solder coating
Part Material Finish
Ordering Information
Number of Divisions (Number of Combination)
Series Name: D: Divider
C: Combiner
Center Frequency
2000M : 2000MHz
2 D - 2000M - 2 - (40)
3 4 5
1
2
3
Suffix
(40) : RoHS Compliant
4
5
1 2
No damage, cracks, or parts dislocation
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
