1600 SERIES RECTANGULAR CONNECTORS - Hirose Electric - #1

Text version of the page

105 SUMICON 1600 SERIES RECTANGULAR CONNECTORS The SUMICON 1600 series are multi-contact connectors designed by Hirose. 8, 12, 16, 20, 24, 28, 34, 45 and 60-contact models available (same as the 1300 series). The connector units are available in three types: soldering, wrapping, and crimping. Accessories are C case, CA case, CBA case, ST stopper, STA stopper, and STB stopper, By combining the many options noted above, the SUMICON 1600 series connectors meet a wide variety applications. In the SUMICON 1600 series, the connector unit is completely separated from the accessories such as the cases and stoppers to diversify the specificaions and facilitate wiring connection. The SUMICON 1600 series are specified in the NTT specifications No.1931. Standard Type General (1) Shape of terminal opening P: Male terminal S: Female terminal (2) Terminal connection method No sign: Soldering W: Wrapping C: Crimp (3) Series No. 16: 1600 series (4) Number of contacts 34: 34 contacts (5) Serial sign for connctor units Provided with a sequence of upper-case alphabetic characters. No sign or sign other than W: Soldering Sequence: No sign, B, C, D, E ... (6) Plating A: Silver-plated G: Gold-plated (7) Signs for accessories C: Plug case ST: Stopper bracket with horizontal cable inlet opening J: Jack Case H: Handle DB: Deep bracket (8) Serial signs for accessories Each accessory (C, ST, J, H, DB) is provided with sequence of upper-case. alphabetic characters. Sequence: No sign, A, B, C... Accessories, C, ST, or J followed by Òno signÓ: Side lock types Accessories, C and ST followed By A: Top touch lock type Note: The space for no sign is filled sequentially. (9) Special specification, ( ) is filled with a serial number, except for the case and bracket, for which the following apply. (51): Bracket only (50): Case only Ordering Information P W �| 16 34 �  A �| C �  �i �j (1) (2) (3) (4) (5) (6) (7) (8) (9) Electrical Characteristics Item Standard Contact Resistance 7mÙ max. at DC 1A Insulation Resistance 1000MÙ min. at DC 500V Withstand Voltage AC 1000V for 1 minute Current Rating 3A Voltage Rating 300V AC Part Insulator Male Terminal Female Terminal Plug Case Stopper Bracket Material Glass filled diallylphthalate resin Brass Phosphor bronze ABS resin�iblack�j Steel Finish Blue Type A: Silver-plated Type G: Gold-plated NTT spec: ABS resin, 2.5PB 6.0/2.0�icolor�j Nickel plating Applicable wire AWG Applicable wire�imm�j Max. coating O.D�i. mm�j 26 0.41 0.95 Ordinary wrapping about 8 2 wrap 28 0.32 0.75 Coating one wrap about 8 30 0.26 0.6 Coating one wrap about 9 Wrapping method Effective number of wrappings Number of wrappings per terminal Material and Finish Wire Wrapping Specifications The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 04/2009