| • HFW-130 T5: Not emissioned model. * Weights and dimensions are subject to variations depending to the genset configuration solicited by the customer. To consult in factory. Ambient reference conditions: 1.000 mbar, 25°C, 30% relative humidity. Rating according to ISO 3046. 1- P.R.P. Prime Power - ISO 8528: prime power is the maximum power available during a variable power sequence, which may be run for and unlimited number of hours per year, between stated maintenance intervals. The permissible average power output during a 24 hours period shall not exceed 80% of the prime power. 10% overload available for governing purposes only. 2- Standby power (ISO 3046 Fuel Stop power): power available for use at variable loads for limited annual time (500h), within the following limits of maximum operating time: 100% loads 25h per year - 90% loads 200h per year. No overload available. Applicable in case of failure of the main in areas of reliable electrical network. 3- M= Mechanical speed governor; E= Electronic speed governor. 4- NA= Natural aspirated; TC= Turbocharged; TCA= Turbocharged and aftercooled. |