catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Cooling unit, Rack, Heat exchanger, Plastic enclosure, Console enclosure
Text version of the page
| Composition ■ Fully closed enclosure. ■ EPDM sealing gasket assures overall sealing to IP65. ■ A smooth door, a glazed door or an anti-flyposting door can be fitted. ■ Model KT: glazed door resistant to external mechanical impact IK8 (5J) conforming to EN 50102. ■ Model ...R: anti-flyposting door with on anti-forced entry system. ■ 1 rear panel or 1 rear door. ■ Reversible plain door with two hinges in cabinets up to 750 high and 4 in cabinets as from 1000 mm. ■ Double bar lock operated by means of LDB5. Other transformations and handle locks available. ■ Two-door cabinets include a central upright. | ||||||||
| Hot-moulded reinforced polyester cabinets. Constructive characteristics ■ Resistant to principal chemical agents and corrosive atmospheres. ■ UV light stabilised. ■ Reversible door, opening to 120°. Maximum permissible load: 30 kg/m2. ■ Door closure system outside the sealed zone. 2 closure points for enclosures up to 750 mm height, 4 closure points from 1000 mm height, with rod operating mechanism. ■ Inside rear panel and side panels incorporate bosses for installation of M8 threaded inserts to facilitate direct attachment of mounting accessories. Technical characteristics ■ Grey to RAL-7032. ■ Conforms to general rules for empty enclosures established by standard EN 50298. ■ IP65 according to IEC 529 (EN 60529). ■ High degree of resistance to mechanical impacts IK10 (20J) according to EN 50102. ■ Self-extinguishing according to IEC 695-2-1 (960°). ■ Wide range of operating temperatures -50 to 150 °C. ■ Suitable for double insulation assemblies according to standard IEC 439-1 (EN 60439-1). | ||||||||
| 2/50 HIMEL boxes and enclosures in polyester | ||||||||