| | | | | | | | | | | | | |
| | | |
| | | | | |
| | | | | |
| | | |
| | | |
| | | Communication Module for Real-Time-Ethernet | | |
| | | |
| | | | | | | |
| | | |
| | | |
| | | |
| | | |
| | netX based comX-Modules gets its identity by loading an appropriate firmware file. The following real-time Ethernet protocols are supported: | |
| | | |
| | All stacks are implemented as slave protocols and are executed on the comX-Module. Data exchange with the host application is carried out via a Dual-Port-Memory interface. The process data images are available directly via memory read and write functions. The comX-Module features two RJ45 connectors for Ethernet. | |
| | | |
| | | |
| | | |
| | All Real-Time Ethernet System use netX Network Controller Two Ethernet Ports with Switch and Hub for Line Topology System/Status/Link/Activity LEDs 8 or 16-Bit Host Application Interface USB & UART Diagnostic Interface Direct Process Data Access Same Dimensions and Pin Compatible like our well-known COM-C Module SYCON.net as configurator based on FDT/DTM Short 'Time-To-Market' | | |
| | | |
| | | | | | | | | | | | | |