HID - proximity readers - HID Global - #18

Mounts on a single-gang electrical box for easy installation. Mounts directly on metal with minimal impact on read range performance.

A red LED flashes green and the beeper sounds when reader is presented with a proximity card. The multicolor LED and beeper can also be controlled individually by the host system.

On reader power-up, an internal self-test routine checks and ver­ifies the setup configuration, determines the internal or external control of the LED and beeper and initializes reader operation. An additional external loop-back test allows for the reader outputs and inputs to be verified without the use of additional test equipment.

Sealed in a rugged, weatherized polycarbonate enclosure designed to withstand harsh environments, providing reliable performance and a high degree of vandal resistance.

Wiegand output model interfaces with all existing Wiegand protocol access control systems. Clock-and-Data (magnetic stripe) model interfaces with most systems that accept magnetic stripe readers.

Recognizes card formats up to 85 bits, with over 137 billion unique codes.

Lifetime warranty against defects in materials and workmanship (see complete sales policy for details).

Base Part No.: 5395 Wiegand interface

Base Part No.: 5398 Clock-and-Data interface

Description: Tri-State LED, internal beeper on

ProxCard® II card - upto 5.5" (14 cm) ISOProx® II card - up to 5" (12.7 cm) DuoProx® II card - upto5" (12.7 cm) Smart ISO®/DuoProx® cards - up to 5" (12.7 cm) Proximity & MIFARE® card - up to 5" (12.7 cm) ProxCard® Plus card - upto 1.5" (3.8 cm) ProxKey® II keyfob - up to 2" (5.1 cm) MicroProx® Tag - up to 3" (7.6 cm) *Depending on local installation conditions.

4.70"x3.00"x0.68" (Il.9x7.6x 1.7 cm)

Material: PolycarbonateUL94

5-I6VDC

Linear power supplies are recommended.

Average: 30 mA (5 VDC); 20mA(l2 VDC) Peak: IIOmA(5VDC); 115 mA (I2VDC)

-22°to l50°F(-30°to 65°C)

0-95% relative humidity non-condensing

3.3 oz. (94 gm)

Transmit frequency: 125 kHz Excite frequency: 125 kHz

Wiegand interface: 500 feet (150 m)

Clock-and-data interface: 50 feet (15 m)

Recommended cable is ALPHA 1295 (22 AWG) 5 conductor

minimum stranded with overall shield or equivalent. Additional

conductors may be required for LED or beeper control.

Canada/UL 294 Listed

FCC Certification, United States

Canada Certification

EU and CB Scheme Electrical Safety (EN60950 and IEC60950 ITE Electrical Safety)

Fifteen EU Countries underthe R&TTE Directive (EN 300 330 - SRD, and ETS 300 683 - EMC) CE Mark

Australia C-Tick, New Zealand Taiwan, China

Options • CLASSIC series cover in white, beige, charcoal gray or black (or)

• Designer series cover in white, wave blue, charcoal gray or black

• LED and beeper operation

(Please see "Howto Order Guide" for a description of the options and associated part numbers.)

ï n

u

© 2007 HID Global. All rights reserved. HID, and the HID logo are trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Rev. 4/2007

MKT-PTHINLINEii_DS_EN

9292Jeronimo Road Irvine, CA926I8-I905 U.S.A.

Phone: (800) 237-7769 Phone: (949) 598-1600 Fax: (949) 598-1690

19/F 625 King's Road North Point Island East Hong Kong

Phone: +852 3160-9800 Fax: +852 3160-4809

Circunvalación Ote.#20l B Despacho 2 Col.Jardines del Moral Leon37l60,Gto. México

Phone: +52 477 779 1492 Fax: +52 477 779 1493

Homefield Road Haverhill, Suffolk CB9 8QP England

Phone: +44(0) 1440 714 850 Fax: +44 (0) 1440 714 840