RTM 120 - Hexcel Corporation - #1

RTM 120 / HY2954 is a two component system, developed for the manufacture of high performance Aerospace and Industrial composite parts using the Advanced Resin Transfer Moulding Process.

RTM 120 resin is a hot curing epoxy matrix system for service temperatures from -60°C to 120°C (-75°F to 248°F).

Clear, pale yellow liquid <2 1.1 - 1.2 1000 - 140 5.7 - 6.0 > 185

As-supplied form Colour

Density at 25°C Viscosity at 25°C Epoxy content Flash point

Gardner scale ISO 1675 DIN 53015 ISO 3001

g/cm³ mPa s Eq/kg

As-supplied form Colour

Density at 25°C Viscosity at 25°C Flash point

clear liquid

<3 0.94 - 0.95 70 - 120 175

Gardner scale ISO 1675

DIN 53015

g/cm³ mPa s

The above products should be stored in a dry place, in their original, sealed containers at 5-25°C. Under these conditions they will have 12 months shelf life from the date of manufacture. Partly used containers should be sealed immediately after use. Hardener HY 2954 should not be stored below 5°C or allowed to freeze.

HEXCELBE Composites