Website:
HepcoMotion
Group: Hepco
Catalog excerpts
transmission system
Open the catalog to page 1
transmission system The GV3 linear guidance and transmission system has been designed to provide the customer with an unrivalled choice of sizes and options to cater for virtually every linear motion requirement. In devising GV3, Hepco have retained the best features of their highly successful Generation 2 and CM Slide Systems in a greatly expanded range. Many new components have been added including Single Edge Slides, Flat Tracks and drive options. Customers may now choose Slides from three grades of precision and combine them with either Twin Bearings, Double Row Bearings or low cost...
Open the catalog to page 2
FOR AMENDMENTS & UPDATES VISIT www.HepcoMotion.com and select literature button System Composition Application Examples System Selector Data and Dimensions for Individual Components Carriages, Carriage Locking Device and Shock Absorber Fixing Blocks Slide Beams Cap Seals, Cap Wipers and Lubricators Flange Clamps Flat Tracks Track Rollers Belt Driven Carriages, Belts & Pulleys Rack Driven Carriages Gearboxes, AC Geared Motors & Flanges AC Speed Controller & Ancillary Components Data and Dimensions for Assembled Systems ‘V’ Slide Systems Systems with Track Rollers, Racks & Pinions Technical...
Open the catalog to page 3
System Composition Linear Motion System with Standard Bearing Programme Pages 2-7 provide an overview of the comprehensive GV3 linear motion system. Below is shown the basic range of Slides and components available with Hepco’s Standard Twin and Double Row Bearings. A similar range is available with Hepco’s ALL SLIDES (COMMON FEATURES) 24-29 One piece construction for assured parallelism and rigidity. Manufactured from high quality bearing steel. Deep hardened V faces for maximum wear resistance. Soft centre section allows customising. Wide range of sizes to choose from. 3 grades of...
Open the catalog to page 4
System Composition Slimline Bearings, details of which are shown on the following page. Components are available factory assembled where possible or as individual parts if preferred. Many sizes and types of Hepco component can be interchanged to achieve an unrivalled combination of space and performance possibilities. The GV3 philosophy is to provide a solution to every linear motion problem. ■ Easy method of location ALL BEARINGS (COMMON FEATURES & OPTIONS) 0332-33 ■ Special raceway conformity and low radial clearance, for Slide applications. ■ Twin bearing for tolerance of misalignment...
Open the catalog to page 5
System Composition Linear Motion System with Slimline Bearing Programme Pages 2-7 provide an overview of the comprehensive GV3 linear motion system. Below is shown the basic range of Slides and components available with Hepco’s Slimline Bearings. An identical range of Slides is available with Hepco’s Standard Bearings, details of which are shown on the previous page. Components are available factory assembled where possible or ALL SLIDES (COMMON FEATURES) 24-29 All Slides suitable for both Slimline and Standard Bearings. Please see previous page for specific features. One piece construction...
Open the catalog to page 6
System Composition as individual parts if preferred. Many sizes and types of Hepco component can be interchanged to achieve an unrivalled combination of space and performance possibilities. The GV3 philosophy is to provide a solution to every linear motion problem. ■ Easy method of location SLIMLINE BEARINGS (COMMON FEATURES & OPTIONS) 0334-35 ■ Special raceway conformity and low radial clearance, for Slide applications. ■ Narrow profile for compact system height. ■ Low cost system, specially if combined with P3 grade (unground) slides. ■ Load capacity adequate for many applications. ■...
Open the catalog to page 7
System Composition Linear Motion System Incorporating Flat Tracks & Rollers Pages 2-7 provide an overview of the comprehensive GV3 linear motion programme. Below is shown the extensive range of Flat Tracks and Track Rollers compatible with Hepco’s linear motion systems. See page 16 for the varied ways in which they can be used. The GV3 philosophy is to provide a solution to every linear motion problem. FLAT TRACK 40 Choose from ground all over, ground on 2 opposing faces, or unground. Attractive, corrosion inhibiting black finish on unground faces. Deep hardened faces for maximum wear...
Open the catalog to page 8
System Composition Linear Motion System with Drive Facility / Support Structure Pages 2-7 provide an overview of the comprehensive GV3 linear motion programme. Below is shown the range of GV3 products available with enhanced features to provide a complete engineering package. The GV3 philosophy is to provide a solution to every linear motion problem. 46-47 BELT DRIVEN CARRIAGE Use with Flat Slides, Spacer Slides or Slide Beams in all grades of precision. Choice of 5 sizes each available in two useful lengths. Integral belt tensioners for ease of adjustment. Removable mounting platform for...
Open the catalog to page 9
Application Examples Fixing Slides to Tubular Framework Hepco Single Edge Flat Slides have been designed to attach to the edges of many sizes of square or rectangular tube with sufficient protrusion of the Slide V running face to provide clearance for Hepco Bearings and Lubrication Devices. The fixing hole positions have been regulated to clear the external corner radius of the tube and to allow attachment by means of standard sizes of hexagon bar. Alternatively, Slides can be attached by “Flowdrilling” or by welding. Low Height System A very compact slide system can be achieved by using...
Open the catalog to page 10
Ease of Alignment using all Eccentric Bearings Example shows the possibility to adjust the Hepco GV3 slide system in one plane, thus avoiding the necessity for precision drilling and fitting. Light Applications Where very light loads are anticipated, three Bearings may be used instead of the usual configuration of four. This saves on component cost and assembly time. Heavy Load Requirements For increased load capacity, additional Eccentric Bearings may be installed in between the outermost ones. Multiple bearing installations benefit from the use of Controlled Height Bearings which ensure...
Open the catalog to page 11All HepcoMotion catalogs and technical brochures
-
HDRT Heavy Duty Ring and Tracks13 Pages
-
PSD80 No.1 Ballscrew6 Pages
-
MHD Catalogue8 Pages
-
HTS Drawer Slides Catalogue40 Pages
-
ALR Aluminium Rings4 Pages
-
MCS – RapiLok2 Pages
-
Profiles with Linear Guides8 Pages
-
MCS Catalogue68 Pages
-
Uni-Guide – Product Overview4 Pages
-
DualVee Wash Down Wheels2 Pages
-
DualVee Short Form Catalogue8 Pages
-
ZIMM – Z Series Leaflet4 Pages
-
ZIMM GSZ & Z Series Screw Jacks196 Pages
-
MCS – RapiLok2 Pages
-
MCS Catalogue68 Pages
-
Floating Bearings2 Pages
-
PRT2 1-Trak8 Pages
-
PRT2 No. 11 Mix & Match3 Pages
-
PRT2 No.8 DTS Components19 Pages
-
PRT2 No.6 Bleed Lubrication8 Pages
-
PRT2 No. 2 Installation Details10 Pages
-
DTS2 Dynamic Track Systems8 Pages
-
PRT2 No.6 Bleed Lubrication8 Pages
-
Profiles with Linear Guides8 Pages
-
HepcoMotion1 Pages
-
No 14 PRT2 1-Trak8 Pages
-
ZIMM Z Series Screw Jack196 Pages
-
DTS2 Dynamic Track System8 Pages
-
PRT2 1-Trak8 Pages
-
MCS Catalogue68 Pages
-
ZIMM GSZ & Z Series Screw Jacks196 Pages
-
HDS2 Heavy Duty Slide System40 Pages
-
SL2 Stainless Steel Slide System28 Pages
-
HLG Hepco Linear Ball Guides31 Pages
-
HGS gantry solutions4 Pages
-
MFS machine fencing system6 Pages
-
No. 6 Bleed Lubrication8 Pages
-
ZIMM – Z Series Leaflet4 Pages
-
SBD Sealed Belt Drive20 Pages
-
PRT Ring Slides and Track System64 Pages
-
DualVee Single Edge Slide System28 Pages
-
BSP Ballscrew Premier20 Pages
