HXPEE TP1 Thermal Protectors for Transformers protection
3Pages

Hengxin Precision Electrical Equipment Co.,Ltd ADD: Shachong, Shangsha Industrial Park, Lishui Town, Nanhai District, Foshan City,Guangdong Province,China TEL86-757-81816789-813 E-mail: sales@hengxin-tp.com DESCRIPTION FOR THERMAL MOTOR PROTECTORS DESCRIPTION FOR THERMAL MOTOR PROTECTORS PRODUCT COVERED: Component-Thermal motor protectors Type TP1 GENERAL CHARACTER AND USE: These devices are single pole single throw.TP1 has a nominal operating temperature rang from 60℃ to160℃and only NC contacts。The opening temperature in 5℃ stepthe tolerance on the declared value of rated opening temperature shall be ±5K,±8K,or±10K。The reset temperature occurs between 5K and 70K below opening temperature。For automatic reset thermal protectorsthe tolerance on the declared value of reset temperature shall be ±15K。 Rate of temperature change form 0.1 K/min. up to max. 1.0 K/min。 MARKINGS: Marking of opening temperature in degrees Celsiusavailable in 5℃ stepsmarking of tolerance in K。Provided as follows A. Type Description TP1 XXX XX Tolerance ±K(2 digit) Rated opening temperature ℃(3 digit) Type Series B. Electrical /other data HX—Manufacturing location 10(2.5)A250V~ —Rated current, voltage and nature of supply C. These devices are stamped,“HX”and electrical/other data on the basisand with the type designation on the top of the can。 TYPE LISTING:

Degree of protection Reset characteristics for cut-out action Control pollution situation Housing material Coating material Housing insulation Cross-section of the connecting leads standard version Manufacturing location mark IP00 Type 3 action Normal pollution situation Stainless steel Hard epoxy Shrinking sleeve: AHSIφ8×0.1+0.05 UL E93687 0.50mm2 HX MOUNTING METHOD: Thermal motor protectors according to DIN EN 60730-1 and DIN EN 60730-2-2。Based on their sturdy housingthermal protectors with insulated housing are embedded within the winding heads without pre-treatment。With installed...