ECN/EQN 1100 Series

Rotary encoders with integral bearing for integration in motorsMounted stator coupling Installation diameter 45 mmCompact design Blind hollow shaft•• • • = Bearing = Required mating dimensions = Measuring point for operating temperature = Encoder shown without cover = To fasten the ring coupling, turn the eccentric screw (M4, width A/F 3) to the right by approx. 90°. Max. tightening torque: 2 ± 0.1 Nm = Cable outlet for cables with crimp sleeve 4.3 ± 0.3, 7 long = Plug connector, 15-pin = Variable depending on the coupling = Removable cover = Screw ISO 4762, width A/F 2.5, with patch coating. Tightening torque: 1.2 ± 0.1 Nm ECN: M3 x 10 EQN: M3 x 22 = Compensation of mounting tolerances and thermal expansion, no dynamic motion permitted Dimensions in mm Direction of shaft rotation for output signals as per the interface description

36