Model 1100 Turbine Flow Meters - HEDLAND - #1

Text version of the page

For Water and Water-based Fluids Model 1100 Turbine Flow Meters 2 TEL. 800-433-5263 www.hedland.com • Flow ranges from 0.6 to 5,000 GPM • Rugged 316 stainless steel construction • Meter bore sizes from 3/8" to 10" • NPT, BSP, Victaulic®, or flange end connections from 1/2" to 10" • Accuracy of ±1% of reading • Electronic integration available with HB2800 Flow Monitor, F to I/F to V Intelligent Converter or the K-Factor Scaler • NIST traceable calibration available Specifications Features Materials of Construction: Body 316 Stainless steel Rotor CD4MCU Stainless steel Rotor Support 316 Stainless steel Rotor Shaft Tungsten carbide Turndown Ratio: 10:1 Accuracy: ±1% of reading Repeatability: ±0.1% Calibration: Water (NIST traceable calibration) Pressure Rating: 5,000 psi (345 bar) maximum Temperature: -150 ºF to +350 ºF (-101 ºC to +177 ºC) End Connections: NPT, BSP, Victaulic®, flange Magnetic Pick-up: 30 mV to 3 V (peak-to-peak) -150 ºF to +330 ºF (-101 ºC to +165 ºC) Victaulic is a registered trademark of Victaulic Company. Operating Principle Fluid entering the meter passes through the inlet flow straightener which reduces its turbulent flow pattern and improves the fluid's velocity profile. Fluid then passes through the turbine, causing it to rotate at a speed proportional to fluid velocity. As each turbine blade passes through the magnetic field at the base of the transducer, an AC voltage pulse is generated in the pick-up coil. These pulses produce an output frequency proportional to the volumetric flow through the meter. The Model 1100 Turbine Flow Meter is designed to withstand the demands of the most rigorous flow measurement applications. The meter features a rugged 316 stainless steel housing and rotor support assembly, CD4MCU stainless steel rotor, and abrasion-resistant tungsten carbide rotor shaft and journal bearings. The Model 1100 maintains measurement accuracy and mechanical integrity in the corrosive and abrasive fluids commonly found in a variety of industrial applications. The Model 1100 is standard with a magnetic pick-up which produces a frequency output that is proportional to its volumetric flow rate. When paired with the HB2800 Flow Monitor, this compact system offers local indication of both flow rate and total flow. For further flexibility, Hedland offers electronic options which convert the frequency output to an analog signal for easy electronic integration with most instruments, PLCs, and computers. Pressure Drop vs. Flow Rate 1 10 100 1,000 8,000 50 10 1 .1 Flow Rate GPM PSID Pressure Drop 3/8" 1" 1-1/2" 2" 3" 4" 6" 8" 10" 1/2" 3/4" 7/8" MOUNTING ADAPTER (ELECTRONIC ACCESSORIES) MAGNETIC PICK-UP METER BODY RETAINING RING INLET FLOW STRAIGHTENER TURBINE ASSEMBLY RETAINING RING OUTLET FLOW STRAIGHTENER