Catalogue - 3500/6000 PSI Flow Meters - HEDLAND

See other catalogues for HEDLAND

Portable flow-meter, Pressure indicator, Flow-meter, Gas flow-meter, Ultrasonic flow-meter

Text version of the page

3500/6000 PSI Flow Meters

For Petroleum Fluids___

SPECIFICATIONS:

MATERIALS!

2024 ■ T351 Anooized aluminum body, piston and cone C360 Brass body, piston and cone®

T303 Stainless body. 2024 - T351 Anodized aluminum piston and cone_

COMMON PARTS: Retaining Ring: SAE 10/0/1090 Carbon Steel Spider Plate: T316 SS Retaining Spring: SAE 1070/1090 Carbon Stee! Spring: T302 SS Indicator and Internal Magnet: PPS / Ceramic

Fasteners: T303 SS Guard Seal / Bumper: Buna N Pressure Seals: Vlton Scale Support: 6063 - T6 Aluminum

Guard: FVjtycarbonate End Caps: Nylon ST_

THREADS: SAE '. NPTF ■ . ESPP iy ■ Code 61 Code 52 SAF ' TEMPERATURE RANGE: ' ^; lo 116 ^;C) for higher temp, meters, see page 13 PRESSURE RATING:

• Direct reading

• Install in any position

• 360° rotatable guard/scale ■ Easier-to-read linear scale

• No flow straighteners or special piping required

• Relatively Insensitive to shock and vibration

• Good viscosity stability

• Temperature up to 240 °F

• Accuracy ±2% full scale

• Repeatability ±1%

• Special scales available

• Calibrated for .876 S.G.

:. (800 psi/55 bar m safety factor.

Aluminum / Brass Operating: 3.500 psi/241 bar m tor 3" series! with a 3

For High Cycle Applications: see page 7 Stainless Steel Operating: 6,000 psi/414 bar m;

for 3/4-to 1-1/2" ser

. (5,000 psi/345 bar max. 5) with a 3:1 safety factor.


	PRESSURE DROP: See Ordering Information Table, page 10.
	For detailed differential	ressure charts, see page 55.
	ACCURACY: ±2% of full scale	REPEATABILITY: -1%
	REVERSE FLOW BY-PASS OPTION: F	eatures a two-piece cone that responds
	to How in the primary How direction in the sar	ne manner as the standard design.
	Flow in the reverse rjrection causes the towe	cone shuttle to shift, movrig it below

Reverse Flow By-Pass

Normal Flow Direction


A	B	c	D	E	F
NOMINAL pout :w	LENGTH in (mm}	WIDTH	DEPTH in(nun)	OFFSET	FLOTS
1« (SAE 6\|	4.8(122)	1.68 («\|	1.90(48)	.84(211	.88(22)
*\a m* ici	i e lea	2.07(531	2.40(61)	1.04(26)	1.25(32)
3/4 (SAE 12)	":	2.48(63)	285(721	1.24(321	1.50(38)
'(SAE 18	72(1831	2.43(631	2.85(72)	1.24 r32l	1.50 (381
1-1/4 (SAE 20)	12.2 (310)	4.121105)	4.72 (120)	206(52)	2.75(70)
1-1/2 (SAE 24)		4.12 (105}	4.72(1201	2.06(52)	2.75 (70)

NOTE Dimensions la 1 -1/7 Co* 62.3" and 3" Co* 61 can be ft

Weijhis te all ses can be lound on page 73. ' 3 inch models have Celcon' piston/piston ring

HM»

I TEL. 800-433-5263

IMPROVE YOUR PRODUCTIVITY

3500/6000 PSI Flow Meters - HEDLAND - #1

Portable flow-meter, Pressure indicator, Flow-meter, Gas flow-meter, Ultrasonic flow-meter