Catalogs >
Hawke International U.K >
ICG 623 Cable glands

ICG 623 Cable glands
1Pages

Catalog excerpts

ICG 623 Cable Glands Hazardous Area 87 Flameproof Exd & Increased Safety Exe Dual Certified ATEX / IECEx Application 15.0mm • Outdoor or indoor use. • For use with non-armoured elastomer and plastic insulated cables. • For particular use with:tape bedding or have hygroscopic fillers. - Cables that exhibit ‘Cold Flow’ characteristics. - Enclosures containing an ignition source in gas group IIC areas or • Inspectable Compound Ø 'B' - Cables that are not effectively filled, compact and/or circular, have 'G' Approx (Fully Compressed Length) Ø 'E' Ø 'D' Entry Thread Metric Entry containing an ignition source in a Zone 1 area and exceeding 2 litres in volume. See technical section for installation rules and regulations. CABLE GLAND SELECTION TABLE Size Entry Thread Size Cable Acceptance Details Ref. Metric NPT * Inner Sheath / Cores Outer Sheath 'B' Standard or ' D ' Max. 'E' Max In- Max. No. of Standard Seal Alternative Seal (S) Option Over Cores ner Sheath Cores Min. Max. Min. Max. Os O A B C C2 D E F M20 M20 M20 M25 M32 M40 M50 M63 M75 ½" ½" ¾" or ½" 1" or ¾" 1¼" or 1" 1½" or 1¼" 2" or 1½" 2½" or 2" 3" or 2½" 8.0 8.9 11.0 16.2 21.9 26.3 37.1 47.8 59.0 8.0 10.0 12.5 18.4 24.7 29.7 41.7 53.5 66.2 / 65.3¹ 6 6 10 21 42 60 80 100 120 3.0 7.5 11.0 13.0 19.0 25.0 31.5 42.5 54.5 8.0 11.9 14.3 20.2 26.5 32.5 44.4 56.3 68.2 8.5 9.5 15.5 22.0 27.5 39.0 48.5 13.4 15.4 21.2 28.0 34.8 46.5 58.3 'G' 56.4 56.4 55.8 58.8 62.0 64.5 72.8 77.0 80.7 Hexagon Dimensions Across Across Flats Corners 24.0 24.0 30.0 36.0 46.0 55.0 65.0 80.0 95.0 26.5 26.5 32.5 39.5 50.5 60.6 70.8 88.0 104.0 All dimensions in millimetres (except * where dimensions are in inches). Metric entry threads are 1.5mm pitch as standard, 15mm length of thread. ¹ Smaller value is applicable when selecting reduced NPT entry option. Technical Data • Flameproof Exd and Increased Safety Exe II 2 GD ExtD A21. • Certificate No’s: Baseefa06ATEX0058X and IECEx BAS 06.0015X. • Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC. • Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1. • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X. • Deluge Protection to DTS01. • Operating Temperature Range: -60°C to +80°C. • Assembly Instruction Sheet: AI 305. • Alternative certification options available: Exe II BR-Exd IIC / Exe II Exd IIC / Exe II Features • Provides a barrier seal between the individual insulated cores • • • • • within the cable and prevents entry of the products of an explosion into the cable. Assembly of the cable gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure. The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled. If required, external voids can be repaired. Provides a cable retention seal onto the cables outer sheath. Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard. GOST R-Exe IIU GOST K- Approved for use in Kazakhstan DNV Marine Approval ABS Marine Approval Ordering Information Format for ordering is as follows: Alternative Seal (S), add suffix S to ordering information. Cable Gland Type ICG 623 Size C Thread M32 (Optional) S Cable Gland Type ICG 623 Size C Thread 1 1/4" NPT (Optional) S Two part sealing compound and assembly instructions are supplied with the cable gland. Connection Solutions HPG01 UPD 090610 www.ehawke.com

Open the catalog to page 1