EExe and EExd Enclosures - Hawke - #29

Enclosure Type Stainless Steel Size 6

Increased Safety EExe

• Increased Safety EExe. <ü> II 2 GD EExe II.

• SIZE 6 BASEEFA Certificate No. BAS0I ATEX 2106X.

• ZSIZE 6 BASEEFA Certificate No. BAS0I ATEX 2105U.

• Suitable for use in Zone I,Zone 2, Zone 21 & Zone 22.

• Construction and test standards

EN 50014, EN 50019 and EN 50281-1-1. IEC 60079-0 and IEC 60079-7.

• IP66 ingress protection to IEC 60529 and EN 60529.

• DTS0I deluge protection witnessed by EECS.

• Operating temperature range -40°C to +80°C.

• Temperature Class and Ambient T6 40°C. Optional T5 with ambients up to 65°C.

• Assembly instruction data sheet No. A.I. 266. For SIZE 6.

• Assembly instruction data sheet No. A.I. 267. For ZSIZE 6.

• Alternative Certification Options Available.

I I @ Exe II.

506 mm

08mm Padlocking Facility

210mm

450mm

Face A

4xMI0

, /Mounting •y Holes

Face D

Face B

\

MIO Integral Earth Stud

Face C

28mm

Captive Lid Gasket

M6 Gland Plate Fixing Screws

Gland Plates on Faces B, C and D only.

Approx. weight : 27.5kg

AExe Il/Exe II.

# Serrated Washers/Locknuts with large outside diameters may foul on adjacent glands.

* Serrated Washers/Locknuts must not foul on aperture wall. Note: For Cable Entry Positions see page 34.

Notes: DFor Junction Box Wattage Factor & Combined Terminal Resistance see pages 37 - 39.

□ The box is supplied with an integral internal/external earth stud assembly.

□ WFF terminals are supplied fitted with cover.

All copyright reserved-Hitobell Ltd. This document and all copyricjt therein is the property of: Hawke International a cfusonof Hitobell Ltd (Amerrtoer of the Hubbell Group of Companies).

Copyright ConditionrThis document shall be used only for the purpose for which it is provided and no reproduction or publication of the document may be made and no article may be manufactured or assembled in accordance with information contained in the document without prior written consent of the owner.

To the best of our knowledge the information contained in this leaflet, is accurate at the time of going to print and the company reserves the right to improve or modify any product illustrated without notification. The company is unable to accept liability for any inaccuracies, errors or omissions that may exist. It is the customer's responsibility to ensure that the product is suitable for their application.

HWK05 Mar '02