453/T
1Pages

Catalog excerpts

Cable Glands Flameproof Exd & Increased Safety Exe Dual Certified ATEX / IECEx 15.0mm 'G' Approx (Fully Compressed Length) Pliable wire armour 'C' Metric Entry Entry Thread • Mining. • For use with pliable wire armoured cables. • See technical section for installation rules and regulations. CABLE GLAND SELECTION TABLE Entry Thread Size Size Ref. NPT * Metric Standard or Option Hexagon Dimensions Cable Acceptance Details Inner Sheath ‘A’ Outer Sheath 'B' Standard Seal Alternative Seal (S) Min. 3.0 6.5 10.0 12.5 19.0 25.0 31.5 42.5 54.5 Across Flats Across Corners All dimensions in millimetres (except * where dimensions are in inches). Os - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread. ¹ Smaller value is applicable when selecting reduced NPT entry option. Technical Data • Flameproof Exd and Increased Safety Exe I M2. • Certificate No’s: Baseefa08ATEX0331X and IECEx BAS 08.0112X. • Suitable for use in Mines. • Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 and IEC/EN 60079-7. • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529. • Operating Temperature Range: -60°C to +80°C. • Assembly Instruction Sheet: AI 381. • Provides armour clamping using one clamping arrangement. • Provides a seal onto the cables inner sheath. • Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath. • Manufactured in Brass (standard), Nickel Plated Brass or 316 Stainless Steel. • Brass NPT entries are nickel plated as standard. Ordering Information Format for ordering is as follows: Alternative Seal (S), add suffix S to ordering information. Cable Gland Type 453/T Cable Gland Type 453/T

Open the catalog to page 1