321/R
1Pages

Catalog excerpts

'G' Approx. (Compressed length) Approx. (Compressed length) pp p g Hazardous Area Application The 321/R cable gland provides a seal and cable clamp on the outer cable sheath and is intended for use on non-armoured elastomer and plastic insulated cables. The cable gland certified Exe and is suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas. Increased Safety, Dust Protection Class - Zones - Divisions Certified ATEX / IECEx / c CSA us En ry T e d Entry Thread nt y Thread Metric Metric Entry Entry y CABLE GLAND SELECTION TABLE AND Cable Acceptance Details Entry Thread Size Size Ref. Hexagon Dimensions Outer Sheath ‘B’ Standard Seal Min. 3.2 6.5 10.0 13.0 19.5 25.0 Across Flats Across Corners 'T' — Os - C2 size metric entry threads are 1.5mm pitch as standard, 15mm length of thread. All dimensions in millimetres (except * where dimensions are in inches). ¹ Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable outer sheath diameter is 10.9mm Technical Data ATEX/IECEx Increased Safety Exe IIC Gb and Dust Extb IIIC Db II 2 GD. Certificate No’s: Baseefa06ATEX0059X and IECEx BAS 06.0016X. Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7 and IEC/EN 60079-31. Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X. Deluge Protection to DTS01. Operating Temperature Range: -60°C to +100°C. Assembly Instruction Sheet: AI 452. cCSAus Increased Safety AExe IIC and Dust AExtD Zone 21. Explosion-proof Class 1 Division 2, Class II Division 2 Groups EFG, Class III. Certificate No’s: CSA1205533 for Marine Shipboard Cable. Construction and Test Standards: UL 60079-0, UL 60079-7, ISA 60079-31. CSA 22.2 No: 60079-0, CSA 22.2 No: 60079-7, CSA 22.2 No: 60079-31, UL 2225 • When used in Increased Safety applications, this cable gland may be used with braided cable where the braid and the outer sheath pass into the enclosure. The braid must then be suitably terminated inside the enclosure. Note: Braided cable is classed as unarmoured cable in the EN/IEC 60079 series standards for Exe applications. • Manufactured in Brass (standard), Nickel Plated Brass or 316 Stainless Steel. • Brass NPT entries are nickel plated as standard. • Cable clamp provides required clamp and cleat function Ordering Information Format for ordering is as follows: Certification required i.e. ATEX / IECEx Material & Finish i.e. Brass Nickel Plated Alternative Seal (S), add suffix S to ordering information. Cable Gland Type 321/R 321/R Connection Solutions Connection Solutions www.ehawke.com UPD 090611 SPL 110614

Open the catalog to page 1