153/RAC
1Pages

Catalog excerpts

Cable Glands 'G' Approx (Fully Compressed Length) Armour/Braid 'C' Metric Entry Applicati Application • Outdoor or indoor use. Outdoor Outdoor • For use w single wire armour ‘W’, wire braid ‘X’, aluminium strip armour‘Y’ For use with and steel tape armour ‘Z’ elastomer and plastic insulated cables. Across Flats Across Corners All dimensions in millimetres (except * where dimensions are in inches). Os - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread. For G size glands and above, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering. ¹ Smaller value is applicable when selecting reduced NPT entry option. ² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner sheath diameter is 10.9mm Technical Data • Construction and Test Standards: EN 50262, BS 6121 : Part 1 Type E1W, E1X, E1Y and E1Z. • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X. • Deluge Protection to DTS01 (Deluge Seal Optional). • Operating Temperature Range: -60°C to +80°C. • Assembly Instruction Sheet: AI 399. • Provides armour clamping using one clamping arrangement for all armour / braid types. • Provides a seal on the cables inner sheath. • Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath. • Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. • Brass NPT entries are nickel plated as standard. Alternative Reversible Armour Clamping Rings (RAC) Ordering Information Format for ordering is as follows: Alternate Clamping Ring (AR), add suffix AR to ordering information. Alternate Seal (S), add suffix S to ordering information. Cable Gland Type 153/RAC 153/RAC Cable Gland Type 153/RAC 153/RAC Connection Solutions www.ehawke.com

Open the catalog to page 1