121
1Pages

Catalog excerpts

Cable Glands • Outdoor or indoor use. • For use with non-armoured elastomer and plastic insulated cables. Entry Thread Size Size Ref. 2K Os O A B C C2 D E F G H J Entry Thread 15.0mm (Fully Compressed Length) 'G' Approx Metric Entry Across Flats Across Corners All dimensions in millimetres (except * where dimensions are in inches). 2K - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread. For G size glands and above, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering ¹ Smaller value is applicable when selecting reduced NPT entry option. ² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable outer sheath diameter is 10.9mm Technical Data • Construction and Test Standards: EN 50262, BS 6121 : Part 1 Type A2. • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529. • Deluge Protection to DTS01. • Operating Temperature Range: -60°C to +100°C. • Assembly Instruction Sheet: AI 392. • Provides a cable retention seal onto the cables outer sheath. • Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. • Brass NPT entries are nickel plated as standard. Ordering Information Format for ordering is as follows: Alternate Clamping Ring (S), add suffix S to ordering information. Cable Gland Type 121 Cable Gland Type 121

Open the catalog to page 1