Hydraulic clamps type HSE and HSA - HAWE Hydraulik - #1

Text version of the page

Hydraulic cylinders Hydraulic clamps type HSE and HSA Hydraulic clamps type HSE and HSA are single-acting power elements equipped with return springs, which are used in hydraulic fixtures where only a very restricted space is available for the generation of high forces with limited piston movement. The type HSE is designed as a screw-in cylinder whereas type HSA is manifold mounting. These clamps are available, depending on application with piston diameters between 12 and 40 mm and strokes between 2 and 25 mm. They are mainly used for clamping work pieces, slides and guides, indexing round tables and for bending punching and cutting purposes. Nomenclature: Design: pmax: Fmax: Hydraulic clamps Screw-in version Manifold mounting 500 bar 200 ... 60000 N 3-4 2005 3 Fmax (N) with 500 bar 5500 10000 15000 23000 40000 60000 Oper. pressure pmax (bar) 500 Mounting thread M 20 x 1.5 M 24 x 1.5 M 30 x 1.5 M 36 x 1.5 --- --- Symbol Basic types and general parameters Basic type and size HSE 12 HSE 16 HSE 20 HSE 24 HSA 32 HSA 40 Order examples HSE 24 - 15 Hydraulic screw-in clamps type HSE, piston diameter 24 mm, stroke 15 mm HSA 32 - 20 Manifold mounting hydraulic clamps type HSA, piston diameter 32 mm, stroke 20 mm Stroke (mm) 2 .. 8 3 .. 12 4 .. 20 5 .. 20 20 25