Catalogue - DRR-129 Standard - HAMLIN

HAMLIN

www.ham lin.com

DRR-129 Features and Benefits

Features

• N ormally open switch size with 50.80mm x 5.25mm (2.0" x 0.207") gass envelope

• Capable of switching up to 400Vdc

• Maximum switched current 3 Amps, will carry up to 6 Amps

• Maximum contact rating 100 Watts

• Minimum voltage breakdown 600Vdc

• 10¹⁰ O hms insulation resistance Available sensitivity range 42-83 AT

Benefits

• Hermetically sealed switch contacts are not effected by and have no effect on their external environment

• Capable of switching European mains voltage

• Low, stable contact res stance

• Low space requirement

• Zero operating power required for contact closure

• Ft and forget durability

Applications

• Security

• Limit switching

• Automotive applications

• Industrial safety applications

DIMENSIONS (in) mm

CL OF OVERLAP

(207) MAX. 5.25

(.021) REF. 0,53

. (.5001 REF I Ii« \

50,80 (3.250) NOM.


I Switch Type			DRR-129
Contact Form			A
Underwriters Laboratories Recognised for AC loads only, File E47258 (see note 1)			«
ELECTRICAL RATINGS
Contact Rating (2)		Watt - max.	100
Voltage	Switching	Max.	240Vac rms (400Vdc)
	Breakdown	Vdc - min.	600
Current	Switching	Adc - max.	3.0
	Carry	Adc - max.	6.0
Resistance	Contact, Initial	Q - max.	0.100
	Insulation	Q - min.	10¹⁰
Capacitance	Contact	pF - typ.	0.6
Temperature	Operating		-40 to +125
	Storage (6)	°C	-65 to +125
OPERATING CHARACTERISTICS
Operate Time (3)		ms - max.	4.5
Release Time (3)		ms - max.	2.5
Shock	11ms ¹/2 sine wave	G - max.	100
Vibration	50-2000 Hertz	G - max.	30
Resonant Frequency		Hz - typ.	850
MAGNETIC CHARACTERISTICS
Pull-In Range (4)		Ampere Turns	42-83
Rating Sensitivity (5)		Ampere Turns	60
Test Coil			L4988

Notes 1) For details on electrical specif cdionscontact Hamlin.

2) Contact rding-Product of the switching voltage and current sodd never exceed the

wattage rating.

Contact Hamlin for additional load/life informiion

3) Operate/Release Time-per EA/NARM RS421A,dodesuppressed coil.

4) Pull in Range-Contact Hamlin for tolerances available within this range.

5) RatingSensitivity-The value at which contact ratings and operatingcharacteristics are determined. Derdingma be required below thisvalue.

6) Storage Temperature-Long time exposure at elevated temperature may degrade solderatfity of the leads

USA Tel: +1 920 648 3000 • Fax: +1 920 648 3001 • Email: sales.us@hamlin.com

UK Tel: +44 (0)1379 649700 • Fax: +44 (0)1379 649702 • Emal: saaesuk@hamin.com

Germany Tel: +49 (0) 6142 923920 • Fax: +49 (0) 6142 923921 • Email: salesde@hamlin.com

France Tel: +33 (0) 1 6047 3000 • Fax: +33 (0) 1 6015 9136 • Emal: saesfr@haamin.com

INFORMATION PROVIDED ON THIS DATA SHEET ISPROVIDED FOR INFORMATION PURPOSESONLY AND SHOULD NOT BE RELIED UPON ASBENG ACCURATE FOR ANY PARTICULAR PURPOSE. Product performance may be affected bythe application to which the product is applied. Upon request, HAMLIN will assist purchasers by providinginformation specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchasers reliance upon the information contained on this data sheet without further consultation with authorised representatives of HAMLIN.

ISSUE No: 3 DATE: 28/09/0

DRR-129 Standard - HAMLIN - #1

Hall effect sensor, Sensor, Reed sensor, Switch, Proximity sensor