Catalogue - 55505 Flange Mount Geartooth - HAMLIN

www.hamlin.com

55505 Flange Mount Hall Effect Geartooth Sensor

Features

• Ferrous target sensing

• Internal circuit protection

• Protection against severe and automotive environments

• Self adjusting magnetic range

• Automotive grade circuit protection

• High speed operation

• Short circuit and reverse voltage protection

• On board 10 bit A/D convertor

Benefits

• No chopper delay

• Rotational alignment to target not critical

• Immune to target run out

Applications

• Wheel, transmission and camshaft speed sensing

• Gear tooth sensor

• Rotary encoders

• Industrial

• Commercial

• Automotive

DIMENSIONS (in) mm

BLOCK DIAGRAM

(Laßt)) 41,40

(1.250) 31,75

(.236) " 6,00

I (.197) f— 5,00

VDD Pin 3 (Red)

Rpu

Table 1 +/-

6,35 Nom

Comparator H Output

"01

Clock

(.260)

06,6O

(.937) 023,8O

GND Pin 1 (Black)

OUT Pin 2

(W/B")

*White with Black Stripe

SPECIFICATIONS


SPECIFICATIONS
Hall Type			Digital Switch 3 Wire (Voltage Output)
Supply Voltage	Operate	Vdc	4.75 to 24
Supply Voltage	Overvoltage Protection	Vdc-max.	27
Supply Voltage	Reverse Voltage Protection	Vdc-max.	-25
Output High Voltage		Vdc	VDD -2 (sinking output with internal pull-up)
Output Low Voltage		Vdc-max.	0.6 @ 20mA
Output Current (continuously on)		mA-max.	20
Current Consumption		mA-max.	1
Current Consumption		mA-max.	10.5
Switching Speed		kHz-max.	15
Temperature	Operating	^oC	-40 to +125
Temperature	Storage	^oC	-65 to + 125

APPLICATION EXAMPLE - Geartooth Sensor

CUSTOMER OPTIONS - Cable Length and Termination

Termination Options:-

Cable Length Options:-(Cable Type 20 AWG Type TXL per SAE J-II28)

SELECT OPTION

DESCRIPTION

.197 (5mm) Max.


	SELECT OPTION	LENGTH mm
	01	(3,94) 100
	02	(11,81) 300
	03	(19,69) 500
	04	(29,53) 750
	05	(39,37) 1000

Tinned leads

Typical Output

JlTLFL

Deutsch DTM04-3P

Molex MX 150

INFORMATION

55505 I-

Series 55505 Cable Length Termination

Table 1 Table 2

Hamlin USA Tel: +1 920 648 3000 • Fax: + 1 920 648 3001 • Email: sales.us@hamlin.com

Hamlin UK Tel: +44 (0)1379 649700 • Fax: +44 (0)1379 649702 • Email: sales.uk@hamlin.com

Hamlin Germany Tel: +49 (0) 6142 923920 • Fax: +49 (0) 6142 923921 • Email: sales.de@hamlin.com

Hamectrol France Tel: +33(0) 1 6047 3000 • Fax:+33(0) 1 6015 9136 • Email: sales.fr@hamlin.com

Issue No:AC Date:08.01.09 DCR B6063

INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is put. Upon request, HAMLIN will assist purchasers by providing information specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser's reliance upon the information contained on this data sheet without further consultation with authorised representatives of HAMLIN.

55505 Flange Mount Geartooth - HAMLIN - #1

Proximity sensor, Reed switch, Shock sensor, Contactor, Safety sensor