Catalogue - 55140 Flange Mount - HAMLIN

HAMLIN

www.hamlin.com

55140 Flange Mount Hall Effect Sensor Features and Benefits

^^^^^fc mm ! -re— e—i-ii—e-aP^^^F _Li j i CLLiUC! H_C

"^T BY MICRONAS

Features

• Magnetically operated position sensor

• Digital, latching or programmable analogue types available

• Medium, high or programmable sensitivities

• 3 wire (voltage output) or 2 wire (current output) versions

• Vibration 50g max. @ 50-2,000Hz

• Shock 150g max. @ 11ms 1/2 Sine

• EMC to DIN 40839 (Consult Hamlin)

• Reverse/Over Voltage Protection

• Built in temperature compensation

Benefits

• High switching speed up to 10kHz

• Long life; up to 20 billion operations

• Unaffected by harsh environments

• Operates in static or dynamic magnetic

field

• Customer selection of cable length and connector type

Applications

• Position and limit sensing

• RPM measurement

• Flow metering

• Commutation of brushless dc motors

• Angle sensing

• Magnetic encoders

DIMENSIONS (in) mm

LOCK DIAGRAMS

2 WIRE VERSION ILLUSTRATED

2 WIRE VERSION

VDD If

Pirn ,-1-

(Red)

cn_L

23.00_ , Table 2 ±{.393) 10.00

(Not including encapsulant) | Ç250)

GND Pin 2 (Black)

Centre of Sensitivity

Notes

1) Add capacitor Cn as shown, close to the sensor, for transient suppression if required

2) Add resistor Rpu as shown for sinking output

3 WIRE VERSION

VDD

Pin 1 (Red)

Comparator — Output

Slot (.126 X.150) 3.20x3.81 Typ.

General Tol.: ±(.005) 0.13

GND

pina

(Black)

OUT Pin3 (Blue)

CUSTOMER OPT

itching Specifications


SPECIFICATIONS				Digital Switch or Digital Latch
Hall Type				3 Wire (Voltage output)	2 Wire (Current Output)	A - Analogue (Programmable Only) (Note 2)
Supply Voltage (Note I)	Absolute Ratings		Vdc	-I5 to +28	-I5 to +28	8.5
	Operate		Vdc	+3.8 to +24	+3.75 to +24	4.5-5.5
	Overvoltage Protection		Vdc-max	32	32	I9.5
Output High Voltage			Vdc	sinking output	N/A	4.65
Output Low Voltage			Vdc-max	0.4 @ 20mA	N/A	0.35
Output Current (continuously on)			mA-max	20	N/A	-I.0 to +I.0
Current Consumption over Temperature Range		Low	mA	I.6 - 5.2	5-6.9	2 - I0
Current Consumption over Temperature Range		High	mA	I.6 - 5.2	I2-I7	2 - I0
Switching Speed			kHz-max	I0	I0	2
Temperature	Operating		^OC	-40 to +I00	-40 to +I00	-40 to +I00
Temperature	Storage		^OC	-65 to +I05	-65 to +I05	-65 to +I50
Note I - As long as Tj (Junction Temperature) max.is not exceeded Note 2 - Preprogrammed by Hamlin or Customer pending agreement

STOMER OPTIONS - Sensitivity, Cable

TABLE 1

TABLE 2

TABLE 3

HALL OPTIONS

ACTIVATE DISTANCES ARE APPROXIMATE

using NeFeB MAGNET (.827Lx.276Wx.I85H) 21 x7x4.7 Hamlin p/n 5812334000

N I S

Cable Length:-

(Cable Type 24 AWG 7/32 PVC | l05^oC ULI430/ULI569)

Termination Options:-

SELECT OPTION

DESCRIPTION (2 WIRE VERSION ILLUSTRATED)

Standard Lengths

Tinned leads


	SELECT OPTION	CABLE LENGTH (in) ^mm
	01	(3.94) I00
	02	(II.8I) 300
	03	(I9.69) 500
	04	(29.53) 750
	05	(39.37) I000


Select Hall Option	Hall Typ^e	Sensitivity Gauss (Typ.)	Activate - d (in) mm
2M	2 Wire Switch	I20	(.53I) I3.5
2H	2 Wire Switch	57	(.728) 18.5
2L	2 Wire Latch	40	(.827) 2I.0
3M	3 Wire Switch	I30	(.492) I2.5
3H	3 Wire Switch	59	(.709) I8.0
3L	3 Wire Latch	86	(.394) I0.0
AP	Analogue	Programmable	Consult Hamlin

6.35mm fastons

m III

AMP MTE 2.54mm pitch

JST XHP 2.5mm pitch

ORDERING INFORMATION

I 551401

XX I-

Series 55140 Hall option Cable Length

Termination

Table 1 Table 2

Table 3

Hamlin USA Tel: +1 920 648 3000 • Fax: + 1 920 648 3001 • Email: sales.us@hamlin.com

Hamlin UK Tel: +44 (0)1379 649700 •Fax:+44 (0)1379 649702 •Email: sales.uk@hamlin.com

Hamlin Germany Tel: +49 (0) 6142 923920 Fax: +49 (0) 6142 923921 • Email: sales.de@hamlin.com

Hamectrol France Tel: +33 (0) 1 4687 0202 • Fax: +33 (0) 1 4686 6786 • Email: sales.fr@hamlin.com

Issue No: AE Date: 16/07/09 DCR B6301

INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is put. Upon request, HAMLIN will assist purchasers by providing information specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser's reliance upon the information contained on this data sheet without further consultation with authorised representatives of HAMLIN.

55140 Flange Mount - HAMLIN - #1

Level sensor, Reed relay, Position sensor, Contactor, Shock sensor