Accessory - HAM-LET FRANCE - #1

Text version of the page

88 COMPRESSION TUBE FITTINGS Dimensions are for reference only, and are subject to change without notice. INSTALLATION INSTRUCTIONS FOR LET-LOK® FITTINGS 38mm-50mm 11/4’’-2’’ 1. Close the nut and ferrules on the tube with a hydraulic tool. 2. Open and release from the tool. 3. Apply the G-Rapid paste on areas A and B. 4. Tighten the nut on body 1/2 a turn with a wrench To order: use part No. 3900753 A B ACCESSORIES ADDITIONAL SIZES: GOLDEN GAUGE PART NO. MIN. NOMINAL WALL THICKNESS 3901508 Golden Gauge 1/16” 3901509 Golden Gauge 1/8”-2-3 mm 3901510 Golden Gauge 3/16”- 4 mm 3901513 Golden Gauge 5/16”- 8 mm 3901511 Golden Gauge 10 mm 3901247 Golden Gauge 5/8”-14-15-16 mm 3901246 Golden Gauge 3/4”-18 mm 3901512 Golden Gauge 7/8”-20-22 mm 3901245 Golden Gauge 1”-25 mm GAUGE PART NO. MIN. NOMINAL WALL THICKNESS 3900098 1/4” (6mm), 3/8”, 1/2” (12mm) SIZE: GOLDEN GAUGE G-RAPID PLUS LOW FRICTION PASTE HIGH SAFETY In applications where severe conditions and high pressure exist, we recommend the following installation procedures: 1. Check that the nut is finger tight. 2. Insert the tube (up to the shoulder). 3. Rotate the nut with a wrench until the tube does not rotate freely. 4. Mark position of the nut. 5. Rotate the nut 1-1/4 turns. This method ensures that even if the tube O.D. is at the minimum tolerance, the ferrules will be in contact with the tube for the full 1-1/4 rotation.