video corpo

Zero-Point Clamping Systems
23Pages

{{requestButtons}}

Catalog excerpts

Zero-Point Clamping Systems - 1

Zero-Point Clamping Systems www.halder.com

Open the catalog to page 1
Zero-Point Clamping Systems - 2

Halder Zero-point Clamping Systems Coupling elements for clamping and at the same time centring jigs and fixtures, developed as a quick-change system for shortening set-up times. • Referenced clamping of jigs and fixtures provided by repeatedly accurate placement at the "zero-point". • For machining workpieces in several working steps on different machines. Built-in double acting connecting elements In addition to the maximum of flexibility provided by Halder Zeropoint Clamping Systems – be this hydraulic operation in a built-in version with integrated lifting of the jigs and fixtures or...

Open the catalog to page 2
Zero-Point Clamping Systems - 3

Designs of the Zero-Point Clamping Systems Hydraulic, double acting, built-in connecting element Holding force of 30 kN - Hydraulic clamping and centring. Releasing and lifting with integrated retraction cylinder, hydraulic. Integrated pneumatic blow-out of the supporting surfaces. Pneumatic sensing check on the supporting surface during clamping. Can be integrated in base plates, angles, cubes, etc. Hydraulic, single-acting, built-in connecting element Holding force of 20 kN - Clamping and centring by spring load. Releasing and lifting with integrated retraction cylinder, hydraulic....

Open the catalog to page 3
Zero-Point Clamping Systems - 4

Time is Money Halder Zero-point Clamping Systems are a worthwhile investment that pay off within a very short period of time through simpler retooling procedures, less downtime for machinery and nearly unlimited flexibility. Make the comparison yourself as to the cost advantages obtained using Halder Zero-point Clamping Systems. Compare production time / set-up time WITH the Halder Zero-point Clamping System WITHOUT the Halder Zero-point Clamping System Machinery down-time Machinery down-time Cost comparison of set-up costs with and without the Halder Zero-point Clamping System Set-up costs...

Open the catalog to page 4
Zero-Point Clamping Systems - 5

Connecting elements ro-Point Clamping Systems

Open the catalog to page 5
Zero-Point Clamping Systems - 6

Zero-Point Clamping Systems hydraulically operated, double acting, with lifting-off

Open the catalog to page 6
Zero-Point Clamping Systems - 7

Zero-Point Clamping Syst hydraulically operated, single acting with lifting-off location hole hydraulic connection • Steel, case-hardened, ground

Open the catalog to page 7
Zero-Point Clamping Systems - 8

Zero-Point Clamping Systems Connecting Elements modular, mechanically operated Material: Body: Steel, case-hardened, ground Control module: Steel, blackened Connecting Elements modular, hydraulically operated Material: Body: Steel, case-hardened, ground Control module: Steel, blackened

Open the catalog to page 8
Zero-Point Clamping Systems - 9

Zero-Point Clamping Systems Connecting Elements modular, pneumatically operated Material: Body: Steel, case-hardened, ground Control module: Connecting Elements modular, mechanically operated, protected against twisting Material: Body: Steel, case-hardened, ground Control module: Steel, blackened

Open the catalog to page 9
Zero-Point Clamping Systems - 10

Zero-Point Clamping Systems centrical, secured against twisting • Steel, case-hardened, ground

Open the catalog to page 10
Zero-Point Clamping Systems - 11

Zero-Point Clamping Systems Base Plates for 2 connecting elements >>> Special plates upon request. <<<

Open the catalog to page 11
Zero-Point Clamping Systems - 12

Zero-Point Clamping Systems »> Special plates upon request. «< Baseplate: •Aluminium Connecting element: • Refer to ref. no. 1990.100-102

Open the catalog to page 12
Zero-Point Clamping Systems - 13

»> Special plates upon request. «< ro-Point Clamping Systems Base Plates

Open the catalog to page 13
Zero-Point Clamping Systems - 14

Zero-Point Clamping Systems Base Plates with 4 connecting elements »> Special plates upon request. «< Base plate: • Aluminium Connecting element: • Refer to ref. no. 1990.100-102

Open the catalog to page 14
Zero-Point Clamping Systems - 16

Zero-Point Clamping Systems Base Plates with 4 double acting connecting elements >>> Special plates upon request. <<< Material: Base plate: Connecting element: Steel, case-hardened, ground

Open the catalog to page 16
Zero-Point Clamping Systems - 17

release by hydraulical means sro-Point Clamping Systems Base Plates connecting elements »> Special plates upon request. «<

Open the catalog to page 17
Zero-Point Clamping Systems - 18

Zero-Point Clamping Systems Base Plates with 4 single acting connecting elements release by hydraulical means »> Special plates upon request. «< Base plate: • Aluminium Connecting element: • Steel, case-hardened, ground

Open the catalog to page 18
Zero-Point Clamping Systems - 20

Zero-Point Clamping Systems Assembly position of connecting rings independent from distance

Open the catalog to page 20
Zero-Point Clamping Systems - 21

Zero-Point Clamping Systems Pressure Intensifier Note: Pressure intensifiers - also called pressure converters - are used to convert compressed air into hydraulic pressure and can be used on all hydraulically operated zero-point clamping systems. Pressure intensifiers are normally applied if compressed air is already available for a machine or a device. They are an alternative for conventional hydraulic power units. A hydraulic hose at a length of 1.5 m is included.

Open the catalog to page 21
Zero-Point Clamping Systems - 22

Application sample showing EH 1990.080 clamping element, hydraulically operated, single acting with lift-off This sample shows the application of a zero-point clamping system on a machine center. Picture 1 The base plate with the clamped work piece is being put onto the zero-point clamping system by means of a crane. Example: Multifunctional base plate with 9 clamping elements for the use of different supporting plates, i.e. with 2, 3 or 4 clamping rings. Picture 2 Easy insertion of the base plate due to: • Alignment by means of a critical taper on both the base plate and the counter piece,...

Open the catalog to page 22
Zero-Point Clamping Systems - 23

WORKHOLDING SYSTEMS www.halder.com Standard Parts Workholding Systems Soft-face Mallets Aviation Products WORKHOLDING SYSTEMS The product range from Halder Please ask for our actual product catalogues.

Open the catalog to page 23

Archived catalogs