Catalogs >
HAIDA EQUIPMENT CO., LTD >
Four Point Bending Stiffness Tester Information

Four Point Bending Stiffness Tester Information
7Pages

Catalog excerpts

Four Point Bending Stiffness Tester Information - 1

Four Point Bending Stiffness Tester Haida International Equipment - Paper & Package Test System (Don't guess before yon test

Open the catalog to page 1

Four Point Bending Stiffness Tester Information - 2

Halda Test Equipments _ 4-Point Bending Stiffness Tester measures the bending stiffness of corrugated board and heavy paperboard rapidly and accurately. The unique design of the pneumatic clamps permits measurements of warped and twisted samples without impairing results.

Open the catalog to page 2

Four Point Bending Stiffness Tester Information - 3

Applicable Standards Mean Value, Standard Deviation, Coefficient of variation, max and min values of the series, MD/CD ratio, Geometrical mean of MD and CD The sample size depends on board type, normally 50–100 mm (2–4 in) wide and bending Test piece length at least 120 mm (4.7 in) longer than chosen bending length. Maximum thickness is 16 mm (0.6 in) Pneumatic clamping effectively eliminates any problems with twisted and curled test pieces Control Method Result Output USB Flash Drive – Print Out the Image File Tabular or graphical presentation of result Laser Displacement Detector...

Open the catalog to page 3

Four Point Bending Stiffness Tester Information - 4

Don't guess before you test l. Full automated testing sequence; 2. Pneumatic clamping effectively eliminates any problems with twisted and curled test series; 3. Recommended settings for different flute types are pre-programmed; 4. Touch screen for easily operation; 5. Tabular or graphical presentation of result. By using the relationship between curvature and deflection the bending stiffness becomes: a = distance of the loading point from the ii' = width of test piece (m) The loading principle and distribution of bending mo merit for the 4- point method.

Open the catalog to page 4

Four Point Bending Stiffness Tester Information - 5

Haida International Equipment (HK1 Ltd 11/F, Front Block, Hanglok Building, Dongguan Haida Corporation Ltd 6/F Rongda Building , Nacheng District, Dongguan City, Guangdong Province HAIDA Vision: 7b fe tfc most vitaBhf an&respectfidtmm! HATDA Mission: "Become your LaB Consultant!

Open the catalog to page 5

Four Point Bending Stiffness Tester Information - 6

Four Point Bending Result Compare Data Test Date: 24/03/2015 Testing Type: Shift testing Source: PM1 Bending Stiffn. MD Std.Dev Bending Stiffn. MD Count Bending Stiffn. CD Mean Bending Stiffn. CD Std.Dev Bending Stiffn. CD Count Haida INTL Measuring Error Measuring Error % Bending Stiffn. MD Mean ITCC Shanghai Board Type / Sample no Haida INTL Measuring Error Measuring Error % ITCC Shanghai BC/F 26765633 Haida INTL Measuring Error Measuring Error %

Open the catalog to page 6

Four Point Bending Stiffness Tester Information - 7

4 – POINT BENDING STIFFNESS TESTER (ISO-5628) Popular Model Compare Brand Mean Value, Standard Deviation, Mean Value, Standard Deviation, Coeffcient of variation, max and min values Min, Max, Average, Standard Deviation, of the series, MD/CD ratio, Geometrical values of the series, MD/CD ratio, Gauss Bells, Tolerances and Bars The sample size depends on board type, The sample size depends on board type, The sample size depends on board type, bending length at least 120 mm (4.7 in) bending length at least 120 mm (4.7 in) bending length at least 120 mm (4.7 in) longer than chosen bending...

Open the catalog to page 7