Chair and Foam Testing Machine from Haida - 21 Pages

Add to MyDirectIndustry favorites
Chair and Foam Testing Machine from Haida

Catalog excerpts

Factory address: Caibai Industrial Zone, Daojiao town, Dongguan City.Guangdong, China. 523185 Business Item ▲Payment: T/T, 50% deposit, the balance payment paid before delivery ▲Delivery time: Within 35 days after receiving the deposit ▲Shipping term: EXW, FOB SHENZHEN or CIF Kelang North ▲Product Warranty: One year (Free delivery damage parts except man-made sabotage) ▲Quotation valid: 45 days Cooperation Partners Quality comes from precision, quality creates

 Open the catalog to page 1

Company Qualification Haida Testing Machine corresponded to BIFMA X5.1 2011 BIFMA X 5.1 Standard Clause Haida Applied Machine 5 Backrest Strength Test-Static-Type I HD-F739 Chair Universal Tester 6 Backrest Strength Test-Static-Type II and III HD-F739 Chair Universal Tester HD-F733 Chair Base Tester HD-F736 Chair Drop Tester HD-F731 Chair Swivel Tester 10 Tilt Mechanism Test-Cyclic HD-F739 Chair Universal Tester 11 Seating Durability Tests-Cyclic HD-F736 Chair Drop Tester HD-F739 Chair Universal Tester HD-F739 Chair Universal Tester HD-F739 Chair Universal Tester Quality comes from...

 Open the catalog to page 2

Chair Testing Solution by BIFMA X 5.1 for Benithem 18 Leg Strength Test - Front and Side Application (See Figure 18a & 18b) This test applies to all chairs without pedestal bases. The purpose of this test is to evaluate the ability of legs to withstand horizontal side and frontal 21 Arm Durability Test - Cyclic (Figure 21a and 21b) The purpose of this test is to evaluate the ability of the chair armrests to withstand stresses that occur as a result of repetitive loading that can be imposed on the armrest structure. Loading of this type is the result of using the armrests as a support when...

 Open the catalog to page 3

Haida Testing Solution: HD-F735 Chair Arm and Leg Tester Product Image Electronic Actuater Tester Introduction: Test rig for chair leg strength test according to BIFMA X 5.1 clause 18 and arm durability test Test Procedure:  BIFMA X 5.1 clause 18 (Front Load Test/ Side Load Test) 1. Functional Load Test/ Proof Load Test A force of 334 N (75 lbf .) shall be applied once to each front leg individually for one(1) minute. Remove the force 2. Proof Load Test Similar with functional load test, but the force is 503 N (113 lbf)  BIFMA X 5.1 clause 21 Simultaneously apply a force of 400N (90 lbf.)...

 Open the catalog to page 4

7 Base Test - Static (See Figure 7) The test shall be performed on all pedestal bases. The purpose of this test is to evaluate the ability of a pedestal base to withstand excessive vertical forces. Haida Testing Solution: HD-F733 Chair Base Tester Product Image precision, quality creates future!

 Open the catalog to page 5

(For reference only) The blocks or supports shall be of sufficient height to prevent the center column and/ or legs from touching the test platform during the test. Tester Introduction: Test rig for chair base test according to BIFMA X5.1 7th. Test Procedure:  A force of 11,120 N (2500 lbf.) shall be applied for one (1) minute.  Remove the force  Apply a second force of 11,120 N (2500 lbf.) for one (1) minute.  Remove the load Consisting of:  1 Computer with operation software  Test parameters can be set in main interface; Time and elongation, elongation and force and others curve can...

 Open the catalog to page 6

9 Swivel Test - Cyclic (See Figure 9) This test applies to all chair types with a swivel seat. The purpose of this test is to evaluate the ability of the chair to withstand stresses and wear of repeated swiveling. Haida Testing Solution: HD-F731 Chair Swivel Tester Product Image

 Open the catalog to page 7

Tester Introduction:  Test rig for chair swivel test according to BIFMA X5.1 clause 9.  To simulate people sit and rotate chair in daily use. Test Procedure:  The seat or platform shall rotate for 60,000 cycles at a rate between 5 and 15 rotations per minute.  Adjust the seat height to its lowest position, repeat the above step Consisting of:  800 mm rotary table diameter  PLC and LCD touch screen display  clockwise and counter-clockwise angle(45°to 355°) or 360°rotation single  113KG Weight by motor Parameters:  maximum seat diameter: 1000 mm  Rotational speed : 5 to 20 cycles /...

 Open the catalog to page 8

17 Caster/Chair Base Durability Test - Cyclic (See Figures 17a through 17e) 17.1 Caster/Chair Base Durability Test for Pedestal Base Chairs This test applies to pedestal base chairs with casters. The purpose of this test is to evaluate the ability of the chair base and casters to withstand fatigue stresses and wear caused by moving the chair back and forth. 17.2 Caster/Chair Frame Durability Test for Chairs with Legs This test applies to chairs with legs and casters. This test is not applicable to chairs with glide/caster combinations (i.e., those having two glides and two casters). The...

 Open the catalog to page 9

HD-F732 Chair Castor Durability Tester Product image Tester Introduction:  Test rig for Castor/Chair Base Durability Test-cyclic according to BIFMA X5.1 2001 clause 17. 1 and clause 17.2  Test rig is suitable for Pedestal Base Chair and Chairs with legs and castors Test Procedure: The Chair or Chair base shall be cycled 2000 cycles over the obstacles and then 98000 cycles on a smooth, hard surface without obstacles. Consisting of:  Holder with the up and down adjustment range: 80mm~500mm  PLC and LCD touch screen display  Base barriers block (It can be removed, for smoothing the...

 Open the catalog to page 10

Drop Test - Dynamic (See Figure 8) This test applies to all chair types. The purpose of this test is to evaluate the ability of the chair to withstand heavy and abusive impact forces on the seat. Haida Testing Solution: HD-F736 Chair Drop Tester Product Image Quality comes from precision, quality creates future!

 Open the catalog to page 11

Tester Introduction:  Test rig for chair drop test according to BIFMA X5.1 2001 Clause 8 & Clause 11.3.  To evaluate Chair to withstand fatigue stresses and wear caused by free fall Test Procedure: BIFMA X5.1 2001 Clause 8  Functional Load Test a) A test bag weighing 102 kg (225 lb.) shall be raised 152 mm (6 in.) above the uncompressed seat and released one time. b) Remove the bag. c) For chairs with seat height adjustment features, set height to its lowest position and repeat a) and b).  Proof Load Test (Similar with Functional Load Test, but the force is 136 kg (300 lb).) BIFMA X5.1...

 Open the catalog to page 12

All HAIDA EQUIPMENT CO. catalogs and technical brochures

  1. ISTA MEMBER

    1 Pages

  2. merry christmas

    1 Pages

  3. Catalog

    1 Pages

  4. Tensile tester

    1 Pages

  5. HD-B615

    1 Pages

  6. HD-E702

    1 Pages

  7. HD-703

    1 Pages

  8. HD-E704

    1 Pages

  9. NEEDLE DETECTOR

    2 Pages

  10. climate chamber

    4 Pages

  11. coating machine

    1 Pages

  12. tensile tester

    13 Pages

  13. drying oven

    1 Pages

Archived catalogs