Habasit Slat and Conveyor Chains (4185) - Habasit - #12

Text version of the page

12 Material overview Plastic chains HabaCHAIN® products are made of high quality plastics from the best raw material producers. Habasit’s program of studying material applications ensures the most suitable plastic type material for the particular conditions, as listed below: Plastic chains – Standard chain materials Material Density [g/cm3] Description 1) DP Standard POM (Acetal) with good strength and good coefï¬�cient of friction. For standard low speed applications. 1.42 1) LF Low-friction POM (Acetal) with high strength and good abrasion resistance. Suitable for high speed applications. 1.42 PT Extra low-friction POM (Acetal)1) with a special selflubricating agent incorporated into the molecular structure. The material shows a low coefï¬�cient of friction, high strength and good abrasion resistance. Suitable for high speed applications with reduced lubrication. 1.43 Temperature range Dry conditions: -40 °C to +93 °C (-40 °F to +200 °F) Wet conditions: -40 °C to +60 °C (-40 °F to +140 °F) Dry conditions: -40 °C to +93 °C (-40 °F to +200 °F) Wet conditions: -40 °C to +60 °C (-40 °F to +140 °F) Dry conditions: -40 °C to +93 °C (-40 °F to +200 °F) Wet conditions: -40 °C to +60 °C (-40 °F to +140 °F) Standard color Gray Light brown for Flexi Chains: White Graybrown for Flexi Chains: White Plastic chains – Special chain materials Material TS EC PK WR WK 1) Description Extra low-friction POM (Acetal)1) with special self-lubricating agents incorporated into the molecular structure. The material shows a very low coefï¬�cient of friction, good strength and abrasion resistance. Suitable for dry running high speed applications. Provides longer wear life at higher speeds. POM (Acetal)1) with a electrical surface resistivity below 50.000 Ohm/sq (DIN/EN 1637). Material has high strength and a good coefï¬�cient of friction. Especially for applications where belt charge-up must be avoided Extra wear-resistant aramidic ï¬�ber-ï¬�lled POM (Acetal)1), for wet and dry applications and abrasive conditions. This special coefï¬�cient of friction compound ensures good wear resistance and a low coefï¬�cient of friction, especially for abrasive, wet or dry running applications. Extra wear-resistant polyamide for dry applications and abrasive conditions (glass). This special coefï¬�cient of friction compound ensures better wear resistance than NY and a low coefï¬�cient of friction. When using this material, it is necessary to use a synthetic lubricating agent (no water). Extra wear-resistant aramidic ï¬�ber-ï¬�lled polyamide, for dry applications and abrasive conditions (glass). This special coefï¬�cient of friction compound ensures better wear resistance than NY and a low coefï¬�cient of friction. When using this material, it is necessary to use a synthetic lubricating agent (no water). Density [g/cm3] Temperature range Standard color 1.43 Dry conditions: -40 °C to +93 °C (-40 °F to +200 °F) Wet conditions: -40 °C to +60 °C (-40 °F to +140 °F) Silver 1.42 Dry conditions: -40 °C to +93 °C (-40 °F to +200 °F) Black 1.41 1.35 1.15 Dry conditions: -40 °C to +93 °C (-40 °F to +200 °F) Wet conditions: -40 °C to +66 °C (0 °F to +151 °F) Dry conditions: -18 °C to +82 °C (0 °F to +180 °F) Wet conditions: not recommended Dry conditions: -18 °C to +130 °C (0 °F to +270 °F) Wet conditions: not recommended Dark gray Black Light green POM (Acetal) generally shows good resistance to oil and alkalines and has a cut-resistant surface. 4185BRO.CHA-en0711HQR