Text version of the page

Ordering Info: DC brush motors can be ordered for any stroke up to 144inches and any peak force up to 180 lbs. Higher forces can be achieved by adding additional secondaries in series (consult factory for more information) L = Ls + Stroke

Model Number Width (W)F contF peakForce ConstantBack EMFRLMagnetic Attraction (in) [mm](lbs) [N](lbs) [N]
lbs/amp [N/amp](V/in/sec) [V/m/sec] (ohms)(mH)(lbs) [N] BRA-XXX-0512.0 [51]4 [19]13 [58]0.9 [4]0.1 [3.9]11.2 45 [200] BRA-XXX-0642.5 [64]9 [38]26 [116]1.7 [8]0.19 [7.9]1.42.4 90 [400] BRA-XXX-0763.0 [76]13 [58]40 [178]2.6 [12]0.29 [11.5]1.73.5135 [600] BRA-XXX-0843.3 [76]15 [67]47 [209]3.0 [13]0.34 [13.2]1.94.1160 [710] BRA-XXX-0893.5 [84]17 [75]54 [240]3.5 [16]0.39 [15.4]2.14.7180 [800] BRA-XXX-1024.0 [102]22 [98]68 [302]4.3 [19]0.48 [19.0]2.45.9225 [1000] BRA-XXX-1144.5 [114]26 [115]82 [364]5.2 [23]0.58 [22.9]2.77.1270 [1200] BRA-XXX-1275.0 [127]31 [138]96 [427]6.1 [27]0.68 [26.9]3.18.2315 [1400] Model Number Width (W)FcFpForce ConstantBack EMFRLMagnetic Attraction (in) [mm](lbs) [N](lbs) [N]
lbs/amp [N/amp](V/in/sec) [V/m/sec] (ohms)(mH)(lbs) [N] BRB-XXX-0512.0 [51]8 [36]25 [111]0.9 [4]0.1 [3.9]0.50.6 90 [400] BRB-XXX-0642.5 [64]17 [76]52 [231]1.7 [8]0.19 [7.9]0.71.2180 [800] BRB-XXX-0763.0 [76] 25 [111]78 [347]2.6 [12]0.29 [11.5]0.91.8270 [1200] BRB-XXX-0843.3 [84] 29 [129]91 [404]3.0 [13]0.34 [13.2]0.92.1315 [1400] BRB-XXX-0893.5 [89] 34 [151]104 [462]3.5 [16]0.39 [15.4]12.4360 [1600] BRB-XXX-102 4.0 [102] 42 [187]131 [582]4.3 [19]0.48 [19.0]1.22.9450 [2000] BRB-XXX-114 4.5 [114] 51 [227]157 [698]5.2 [23]0.58 [22.9]1.43.5540 [2400] BRB-XXX-127 5.0 [127] 69 [267]185 [822]6.1 [27]0.68 [26.9]1.54.1600 [2670]

F cont = Continuous Force, F peak = Peak Force @ 10% DutyFor BRA motors; I continuous = 5.0 Amps, I peak = 15.0 AmpsFor BRB motors; I continuous = 10.0 Amps, I peak = 30.0 Amps Required DC Bus Voltage for Amplifier; V required = (I peak x Rc x 1.4) +(Back EMF x Velocity) The–XXX in the model number is for the stroke in inches (i.e. 18 inches is –018)Ls = 4.38 [111.3 mm] for BRA motors and Ls = 9.56” [242.8 mm] for BRB motors H2W Technologies, Inc 28310C Ave Crocker Valencia, CA 91355 USA(888)-702-0540 (661)-702-9346 Ph (661)-702-9348 Faxwww.h2wtech.com info@h2wtech.com