HY-ALERTA™ 600 Fixed Area Hydrogen Monitor - H2scan - #1

Text version of the page

HY-ALERTA™ 600 Fixed Area Hydrogen Monitor Description H2scan’s HY-ALERTA™ 600 Fixed Area Hydrogen Monitor will provide hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit. The monitor is designed for either ceiling or wall mount and has an RS422 capability that extends the interface from the sensor to the controller to several hundred feet. H2scan's hydrogen-specific sensor technology has no cross sensitivity to any other combustible gases, thus eliminating false positive alarms and increasing system reliability. HY-ALERTA™ is a registered Trademark of H2scan. Specifications subject to change without prior notice. H2scan Jan 2009, International Release 90000006 R4 28486 Westinghouse Place, Ste.100, Valencia, CA 91355 Tel: 661-775-9575, Fax: 661-775-9515 Email: sales@h2scan.com Website: www.h2scan.com Operating Conditions Operating Temperature Range: -20ºC to 40ºC Storage Temperature Range: -40ºC to 50ºC Operating Humidity: 0% to 95% RH Calibration Background Gas: Air Dimensions Total Length: 7.2 in. Mounting Bracket Length: 5.6 in. Total Width: 4.4 in. Mounting Bracket Width: 4.0 in. Depth: 1.6 in. Performance Hydrogen Sensitivity Range: 0.4% to 5.0% hydrogen by volume, 10% to 125% hydrogen lower flammable limit Accuracy: ± (0.03 x indication + 0.2) percent hydrogen by volume Typical Response Time: T90 of 60 sec maximum Ingress Protection: IP64 capable Calibration Interval: 90 days Product Life Expectancy: 10 years Interface Options Input Voltage Range: 8 VDC to 13 VDC Input Current: 1.0 A Analog Outputs: Output Voltages - OR - Output Currents • 0 VDC to 5 VDC • 4 mA to 20 mA • 1 VDC to 5 VDC • 0 mA to 20 mA • 0 VDC to 4 VDC • User-specific mA range • 0.5 VDC to 4.5 VDC • User-specific VDC range Serial Communication Options: RS232 or RS422 Relay Contacts: Two programmable 60 VDC / 1 A SPDT relays with both normally open (N.O.) and normally closed (N.C.) contacts. Certifications: