Spray nozzles for manufacturing of electronic products - 40 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

  13. P. 40

Catalogue excerpts

manufacturing of electronic products

 Open the catalogue to page 1

Electronic technology supporting our information society ■ ■ ■ With the downsizing and upgrade ongoing, now high-performance electronic products are seen in our every scene of daily life. It is IKEUCHI's high-precision spray nozzles that hold the key to the success in electronic product manufacturing, which requires further miniaturization and better performance. Shadow Masks Plasma Display Panel Liquid Crystal Displays Printed Circuit Boards Copper Foils

 Open the catalogue to page 2

Spray nozzles with outstanding wear-resistance_ Spray nozzles for precision developing_ Spray nozzles for high-efficient fine etching and easy maintenance_ Spray nozzles for highly chemical-resistance_ Spray nozzles for precision cleaning_ Pneumatic spray nozzles for uniform spraying_

 Open the catalogue to page 3

Guarantee of Spray Nozzles All IKEUCHI's precision-made hydraulic nozzles are guaranteed for the spray capacities and spray angles. This guarantee covers metal, plastic and ceramic nozzles. ■Spray Capacity Spray capacities shown in this catalog are based on city water of room temperature and all spray nozzles are guaranteed for the spray capacity with- in ±5% under the standard pressure. ■Spray Angle Based on city water of room temperature, all spray nozzles are guaranteed for the spray angle within ±5° under the standard pressure. The standard pressure is defined as a design pressure based on...

 Open the catalogue to page 4

Spray Pattern S Spray Distribution JJRP-PTFE, PVDF series - • • • Compact nozzle made of PTFE, PVDF Technical data on spray nozzles

 Open the catalogue to page 5

for manufacturing of electronic products Suitable for Extremely Fine Wet Etching Mountain-shaped distribution and high spray im- pulse achieve high-efficient etching. High-precision of spray angle ±5* and spray ca- Excellent Uniform Flow Distribution Uniform etching effect in any production lines because the distortion of spray distribution is minimized even if spray pressure is modulated. Easy Maintenance Quick detachable type suitable for easy disassem- bling in periodical maintenance. Whirler inside the nozzle is also removable. Suitable for High Speed Etching Also available in Titanium for...

 Open the catalogue to page 6

Data of spraying ferric chloride by SNAPJet Spray distribution of SNAPJet is very stable and it does not vary much even if spray pressure varies and there is not much deviation of parallel or vertical conical pattern. Therefore stable etching is possible even object of etching changes or there is change in spray Solid line ( — ) and dotted line ( — ) show distributions at each direction X

 Open the catalogue to page 7

for manufacturing of electronic products ISJJX series Easy Maintenance Easy installation and removal for periodical main- tenance. Whirler is also detachable easily. Color Identification Nozzle bodies are color-coded by spray capacity Full cone spray pattern with a round impact area and uniform distri- [Spray Pattern] [Spray Distribution] ISJJX series [Note) Appearance and dimensions may be slightly changed depending on materials and nozzle codes. Structure ■ Two-piece structure comprised of nozzle and adaptor. ■ Easy installation and removal by turning a nozzle 90° by hand. Material ■ Nozzle...

 Open the catalogue to page 8

for manufacturing of electronic products Lead frame Small capacity etching nozzles with same concept as high-efficient etching nozzle SNAPJet series. Suitable for High-efficient Wet Etching Mountain-shaped distribution and high spray im- pulse achieve high-efficient etching. High-precision of spray angle ±5° and spray ca- Excellent Uniform Flow Distribution Uniform etching effect and the distortion of spray distribution is minimized even if spray pressure Easy Maintenance Quick detachable type suitable for easy disassem- bling in periodical maintenance. Whirler inside the nozzle is also detachable. Full...

 Open the catalogue to page 9

for manufacturing of electronic products JJXP-HTPVC series Made of HTPVC with chemical resistance to I solutions such as etchants. Easy Maintenance X-shaped whirler is removable for easy mainte- Injection molded spray nozzle with limited spray -JJXP-HTPVC series- Full cone spray pattern with a round impact area [Spray Pattern] [Spray Distribution] Pipe conn, size CNote) Appearance and dimensions may be slightly changed depending on materials and nozzle codes. Structure ■ One-piece structure with removable X-shaped whirler. Material ■ HTPVC (Heat-treated polyvinyl chloride) ® Nozzle (©Whirler ©Body) pure...

 Open the catalogue to page 10

for manufacturing of electronic products SSXP-HTPVC series pure water Square Spray Pattern Square full cone spray pattern gives no gap in multiple-nozzle arrangement. Chemical-resistant Material Made of HTPVC with chemical resistance to I solutions such as etchants. Injection molded spray nozzle with limited spray -SSXP-HTPVC series- [Note] Appeerence end dimensions mey be slightly chenged depending on matériels and nozzle codes. Structure ■ One-piece structure with removable X-shaped whirler. Material - HTPVC (Heat-treated polyvinyl chloride) Full cone spray pattern with a square Impact area...

 Open the catalogue to page 11

for manufacturing of electronic products JJRP series Spray Nozzles for Ultra-pure Water Excellent wear-resistant PTFE (Polytetrafluoroet- hylene) nozzles and injection molded PVDF (Poly- vinylidene fluoride) nozzles are available. Excellent Spray Distribution Disc whirler is designed to provide uniform distri- bution at small capacity. Full cons spray pattern with a round impact ar- [Spray Pattern] [Spray Distribution] JJRP series [Note) Appearance and dimensions may be slightly changed depending on materials and nozzle codes. Structure ■ One-piece structure with disc whirler. Material ■ PTFE...

 Open the catalogue to page 12

for manufacturing of electronic products patent registered [Note] Appearance and dimensions may be slightly changed depending on materials and nozzle codes. Pipe conn, size u_w_ Structure ■ One-piece structure with orifice cap electrodeposited to body. Material ■ PPS (Polyphenylene sulfide) ®Nozzle (©Body ©Cap) Please inquire or order for a specific nozzle on this coding system.

 Open the catalogue to page 13

for manufacturing of electronic products ISVV series ISVV series Pipe conn, size [Note) Appearance and dimensions may be slightly changed depending on materials and nozzle codes. Structure ■ Two-piece structure comprised of nozzle and adaptor. ■ Easy installation and removal by turning a nozzle 90° by hand. Material ■ Nozzle body S Whirler : PP (Polypropylene) Adaptor : FRPP (Glass-fibre reinforced polypropylene) Packing : EPDM * Packing in FKM available upon request. ®Nozzle((DBody ®Packing-EPDM)

 Open the catalogue to page 14

All H. Ikeuchi & Co., Ltd. catalogues and technical brochures

  1. Fog parasol

    2 Pages

    En
  2. INVVEA

    1 Pages

    En
  3. CRP-AL99

    2 Pages

    En
  4. DDRP

    2 Pages

    En
  5. UZUJP

    1 Pages

    En
  6. TSP

    2 Pages

    En
  7. JJX

    1 Pages

    En
  8. JJHP

    1 Pages

    En
  9. INVV&INJJX

    2 Pages

    En
  10. VVEP-HL

    2 Pages

    En
  11. VVP-stainless

    2 Pages

    En
  12. WVVEP

    2 Pages

    En
  13. Air duster gun

    1 Pages

    En
  14. TAIFU

    2 Pages

    En
  15. CoolPescon

    8 Pages

    En
  16. AW series

    2 Pages

    En
  17. SO-V series

    2 Pages

    En
  18. SLNB series

    2 Pages

    En
  19. BRASINKan®

    4 Pages

    En
  20. COOLKIT B

    1 Pages

    En
  21. COOLKIT A

    1 Pages

    En
  22. COOLKIT series

    1 Pages

    En
  23. Air nozzles

    20 Pages

    En
  24. plastic nozzle

    12 Pages

    En